Overview of Dredging Publications

Please choose the year of publication:

Publications 2015
  1. Wit, L de (2015, januari 14). 3D CFD modelling of overflow dredging plumes. TUD Technische Universiteit Delft (178 pag.). Prom./coprom.: Prof.dr.ir. C van Rhee & Dr.ir. AM Talmon.
  2. Alvarez Grima, A, Miedema, SA, Ketterij, RG van de, Yenigul, NB & Rhee, C van (2015). Effect of high hyperbaric pressure on rock cutting process. Engineering Geology, 196, 24-36.
  3. Karimi, MR, Brosset, L, Ghidaglia, JM & Kaminski, ML (2015). Effect of ullage gas on sloshing, Part I: Global effects of gas-liquid density ratio. European Journal of Mechanics B - Fluids, 53, 213-228.
  4. Miedema, SA (2015). A head loss model for homogeneous slurry transport for medium sized particles. Journal of Hydrology and Hydromechanics (Vodohospodarsky Casopis), 63(1), 1-12.
  5. Miedema, SA (2015). A head loss model for slurry transport in the heterogeneous regime. Ocean Engineering, 106, 360-370.
  6. Miedema, SA & Ramsdell, RC (2015). The Limit Deposit Velocity model, a new approach. Journal of Hydrology and Hydromechanics (Vodohospodarsky Casopis), 63(4), 273-286.
  7. Rhee, C van (2015). Slope failure by unstable breaching. Proceedings of the Institution of Civil Engineers - Maritime Engineering, 168(2), 84-92.
  8. Talmon, AM (2015). Linear stability analysis reveals exclusion zone for sliding bed transport. Journal of Hydrology and Hydromechanics (Vodohospodarsky Casopis), 63(2), 172-180.
  9. Weegenaar, RA, Keetels, GH, Winkelman, MO & Rhee, C van (2015). Sand erosion with a traversing circular jet. Proceedings of the Institution of Civil Engineers - Maritime Engineering, 168(2), 76-83.
  10. Wijk, JM van, Grunsven, F van, Talmon, AM & Rhee, C van (2015). Simulation and experimental proof of plug formation and riser blockage during vertical hydraulic transport. Ocean Engineering, 101, 58-66.
  11. Wijk, JM van & Blok, BWG (2015). The influence of grain size on the performance of conductivity concentration meters. Flow Measurement and Instrumentation, 45, 384-390.
  12. Wit, L de, Rhee, C van & Talmon, AM (2015). Influence of important near field processes on the source term of suspended sediments from a dredging plume caused by a trailing suction hopper dredger : the effect of dredging speed, propeller, overflow location and pulsing. Environmental Fluid Mechanics, 15(1), 41-66.
  13. Chen, X, Miedema, SA & Rhee, C van (2015). Numerical modeling of excavation process in dredging engineering. In W Ge & Y Han (Eds.), Proceedings 7th World Congress on Particle Technology: New Paradigm of Particle Science and Technology Vol. 102. Procedia Engineering (pp. 804-814). Amsterdam, The Netherlands: Elsevier.
  14. Chen, X, Miedema, SA & Rhee, C van (2015). Sensitivity study of bond radius and energy dissipation in parallel bond method. In D Wen & G Raza (Eds.), Crossroads of Particle Science and Technology - Proceedings Joint Conference of 5th UK-China and 13th UK Particle Technology Forum (pp. 1-2). Leeds, UK: University of Leeds.
  15. Combe, Th & Miedema, SA (2015). The Influence of adhesion on cutting processes in dredging. In RE Randall (Ed.), Proceedings Annual Western Dredging Association and Texas A&M University Center for Dredging Studies Dredging Summit and Expo 2015 (pp. 41-56). Vancouver, WA, USA: WEDA.
  16. Helmons, RLJ, Miedema, SA & Rhee, C van (2015). Inclusion of pore pressure effects in discrete element modeling of rock cutting. In E Onate, M Bischoff, DRJ Owen, P Wriggers & T Zohdi (Eds.), Proceedings IVth International Conference on Particle-based Methods - Fundamentals and Applications (pp. 945-956). Barcelona, Spain: CIMNE.
  17. Helmons, RLJ, Miedema, SA & Rhee, C van (2015). Modeling the effect of water depth on rock cutting processes with the use of discrete element method. In C van Rhee &  et al (Eds.), Proceedings CEDA Dredging Days 2015 - Innovative Dredging Solutions for Ports (pp. 1-11). Delft, The Netherlands: CEDA.
  18. Karimi, MR, Brosset, L, Ghidaglia, JM & Kaminski, ML (2015). Singularization of sloshing impacts. In R Porter & J Zhang (Eds.), Proceedings of the 30th International Workshop on Water Waves and Floating Bodies (pp. 1-4). Bristol, UK: University of Bristol.
  19. Miedema, SA (2015). A method to compare slurry transport models. In C van Rhee &  et al (Eds.), Proceedings 17th International Conference on Transport & Sedimentation of Solid Particles (pp. 1-10). Wroclaw, Poland: Wroclaw University.
  20. Miedema, SA (2015). The Delft Sand, Clay & Rock Cutting Model. In RE Randall (Ed.), Proceedings Annual Western Dredging Association and Texas A&M University Center for Dredging Studies Dredging Summit and Expo 2015 (pp. 29-40). Vancouver, WA, USA: WEDA.
  21. Miedema, SA (2015). The slip ratio or holdup function in slurry transport. In RE Randall (Ed.), Proceedings Annual Western Dredging Association and Texas A&M University Center for Dredging Studies Dredging Summit and Expo 2015 (pp. 1-13). Vancouver, WA, USA: WEDA.
  22. Miedema, SA (2015). The Delft Sand, Clay & Rock Cutting Model. Family Edition. Amsterdam, The Netherlands: Delft University Press / IOS Press.
Publications 2014
  1. Beindorf, R (extern), Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) & Baalen, L van (extern) (2012). Calculations of forces and velocities of a submarine narrow trench plough, in sandy soil. Terra et Aqua, 13-24.
  2. Bezuijen, A (extern) & Talmon, AM (3ME-MTT-ODE Offschore and Dredging Engineering) (2014). Soil pressures at the cutting wheel and the pressure bulkhead of an EPB-shield. In C Yoo, SW Park, B Kim & H Ban (Eds.), 8th International Symposium on Geotechnical Aspects of Underground Construction in Soft Ground (pp. 523-529). London: CRC Press.
  3. Burgess, K (extern) & Rhee, C van (CITG-HE-HSFR Hydraulic Structures & Flood Risk + 3ME-MTT-ODE Offschore and Dredging Engineering) (2014). Editorial. Proceedings of the Institution of Civil Engineers ¿ Maritime Engineering, 167(MA2), 55-56.
  4. Chen, X (3ME-MTT-ODE Offschore and Dredging Engineering), Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) & Rhee, C van (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). Influence of particle geometry on the simulation of sand cutting process. In s.n. (Ed.), omae2013 (pp. 1-11). Nantes, france: Asme.
  5. Chen, X (3ME-MTT-ODE Offschore and Dredging Engineering), Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) & Rhee, C van (CITG-HE-HSFR Hydraulic Structures & Flood Risk + 3ME-MTT-ODE Offschore and Dredging Engineering) (2014). Numerical methods for modeling the rock cutting process in deep sea mining. In A Aubault & B Alessandrini (Eds.), ASME 2014 - Proceedings of the 33rd International Conference on Ocean, Offshore and Arctic Engineering (pp. 1-10). New York, NY, USA: ASME.
  6. Chen, X (3ME-MTT-ODE Offschore and Dredging Engineering) & Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). Porosity calculation in discrete element modeling of sand cutting process. In s.n. (Ed.), Wodcon xx (pp. 1-14). Brussels: Woda.
  7. Helmons, RLJ (3ME-MTT-ODE Offschore and Dredging Engineering) & Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). Cutting through hard rock-like materials, a review of the process. In s.n. (Ed.), Wodcon xx (pp. 1-14). Brussels: Woda.
  8. Helmons, RLJ (3ME-MTT-ODE Offschore and Dredging Engineering), Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) & Rhee, C van (3ME-MTT-ODE Offschore and Dredging Engineering + CITG-HE-HSFR Hydraulic Structures & Flood Risk) (2014). New approach to model hyperbaric rock cutting processes. In B Alessandrini & A Aubault (Eds.), Proceedings of ASME 2014 33rd International Conference on Ocean, Offshore and Arctic Engineering (pp. 1-10). New York, NY, USA: ASME.
  9. Karimi, MR (3ME-MTT-ODE Offschore and Dredging Engineering), Brosset, L (extern), Ghidaglia, JM (extern) & Kaminski, ML (3ME-MTT-SHS Ship Hydromechanics and Structures) (2014). A study on conservatism of Froude scaling for sloshing model tests. In JS Chung, F Vorpahl, S-W Hong, SY Hong, T Kokkinus & AM Wang (Eds.), Proceedings of the International Offshore and Polar Engineering Conference (pp. 306-313). Cupertino, CA, USA: International Society of Offshore and Polar Engineers, ISOPE.
  10. Kuiper, RJ (3ME-BME-BB BioMechatronics and BioRobotics), Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering), Frumeau, JCL (extern) & Rhee, C van (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). Influence of the hyperbaric effect on apparent material strength of fully saturated porous rock. In s.n. (Ed.), otc 2013 (pp. 1-13). Houston texas usa: otc.
  11. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2014). An analytical approach to explain the Führböter equation. Proceedings of the Institution of Civil Engineers ¿ Maritime Engineering, 167(2), 68-81.
  12. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2014). A new approach to determine cutting forces in brittle rock under hyperbaric conditions. In B Alessandrini & A Aubault (Eds.), Proceedings of ASME 2014, 33rd International Conference on Offshore Mechanics and Arctic Engineering - OMAE (pp. 1-11). New York, NY, USA: ASME.
  13. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2014). An analysis of slurry transport at low line speeds. In B Alessandrini & A Aubault (Eds.), Proceedings of ASME 2014, 33rd International Conference on Offshore Mechanics and Arctic Engineering - OMAE (pp. 1-12). New York, NY, USA: ASME.
  14. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2014). An analysis of slurry transport at low line speeds. In B Alessandrini & A Aubault (Eds.), Proceedings of ASME 2014, 33rd International Conference on Offshore Mechanics and Arctic Engineering - OMAE (pp. 1-12). New York, NY, USA: ASME.
  15. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). An overview of theories describing head losses in slurry transport, a tribute to some of the early researchers. In s.n. (Ed.), omae2013 (pp. 1-17). Nantes, france: Asme.
  16. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2011). Constructing the shields curve. In s.n. (Ed.), Proceedings of the asme 2011 30th international conference on ocean, offshore and arctic engineering (pp. 1-15). s.l.: s.n..
  17. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). Constructing the shields curve part c: cohesion by silt. In s.n. (Ed.), Wodcon xx (pp. 1-15). Brussels: Woda.
  18. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). Constructing the shields curve part c: cohesion by silt, hjulstrom, sundborg. In s.n. (Ed.), omae2013 (pp. 1-20). Nantes, france: Asme.
  19. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) & Zijsling, DJ (extern) (2013). Hyperbaric rock cutting. In s.n. (Ed.), omae2012 (pp. 1-14). rio de janeiro brasil: Asme.
  20. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2011). Soil cutting processes, a state of the art overview. In s.n. (Ed.), Proceedings of the asme 2011 30th international conference on ocean, offshore and arctic engineering (pp. 1-13). s.l.: s.n..
  21. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). The bulldozer effect when cutting water saturated sand. In s.n. (Ed.), omae2012 (pp. 1-10). Rio de janeiro brasil: Asme.
  22. Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). Dredging processes the cutting of sand, clay and rock cutting theory. Delft: Delft university of technology.
  23. Nobel, AJ (3ME-MTT-ODE Offschore and Dredging Engineering) (2013, mei 24). On the excavation process of a moving vertical jet in cohesive soil. TUD Technische Universiteit Delft (285 pag.). Prom./coprom.: Prof.dr.ir. C van Rhee & Prof.dr.ir. F Molenkamp.
  24. Rahman, M (3ME-MTT-TEL Transport Engineering and Logistics), Abdeli, M (CiTG-StrE-RRE Road and Railway Engineering), Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) & Schott, DL (3ME-MTT-TEL Transport Engineering and Logistics) (2011). Simulation of passive soil failure and cutting processes in sand. In s.n. (Ed.), Proceedings of the asme 2011 30th international conference on ocean, offshore and arctic engineering (pp. 1-15). s.l.: s.n..
  25. Ramsdell, RC (extern) & Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). A head loss model for slurry transport based on energy considerations. In s.n. (Ed.), Wodcon xx (pp. 1-15). Brussels: Woda.
  26. Ramsdell, RC (extern) & Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) (2013). An overview of flow regimes describing slurry transport. In s.n. (Ed.), Wodcon xx (pp. 1-16). Brussels: Woda.
  27. Ramsdell, RC (extern), Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) & Talmon, AM (3ME-MTT-ODE Offschore and Dredging Engineering) (2011). Hydraulic transport of sand/shell mixtures. In s.n. (Ed.), Proceedings of the asme 2011 30th international conference on ocean, offshore and arctic engineering (pp. 1-15). s.l.: s.n..
  28. Rhee, C van (CITG-HE-HSFR Hydraulic Structures & Flood Risk + 3ME-MTT-ODE Offschore and Dredging Engineering) (Eds.). (2014). Proceedings of the Institution of Civil Engineers ¿ Maritime Engineering, 167(2).
  29. Vaartjes-van den berg, N (extern), Frederiks, J (extern), Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering), Swart, P (extern) & Plat, R (extern) (2012). Offshore pipeline trenching in arctic regions: a unique concept "the arctic subsea bucket ladder trencher". In s.n. (Ed.), Otc 2012 (pp. 1-13). Houston, usa: Otc.
  30. Wijk, JM van (3ME-MTT-ODE Offschore and Dredging Engineering), Rhee, C van (CITG-HE-HSFR Hydraulic Structures & Flood Risk + 3ME-MTT-ODE Offschore and Dredging Engineering) & Talmon, AM (3ME-MTT-ODE Offschore and Dredging Engineering) (2014). Axial dispersion of suspended sediments in vertical upward pipe flow. Ocean Engineering, 92, 20-30.
  31. Wijk, JM van (3ME-MTT-ODE Offschore and Dredging Engineering), Rhee, C van (CITG-HE-HSFR Hydraulic Structures & Flood Risk + 3ME-MTT-ODE Offschore and Dredging Engineering) & Talmon, AM (3ME-MTT-ODE Offschore and Dredging Engineering) (2014). Wall friction of coarse grained sediment plugs transported in a water flow through a vertical pipe. Ocean Engineering, 79, 50-57.
  32. Wijk, JM van (3ME-MTT-ODE Offschore and Dredging Engineering), Miedema, SA (3ME-MTT-ODE Offschore and Dredging Engineering) & Rhee, C van (3ME-MTT-ODE Offschore and Dredging Engineering) (2012). Meeting the challenges of deep sea mining. Sea Technology, 53(3), 1-3.
  33. Wit, L de (3ME-MTT-ODE Offschore and Dredging Engineering) (2015, januari 14). 3D CFD modelling of overflow dredging plumes. TUD Technische Universiteit Delft (178 pag.). Prom./coprom.: Prof.dr.ir. C van Rhee & Dr.ir. AM Talmon.
  34. Wit, L de (3ME-MTT-ODE Offschore and Dredging Engineering), Talmon, AM (3ME-MTT-ODE Offschore and Dredging Engineering) & Rhee, C van (CITG-HE-HSFR Hydraulic Structures & Flood Risk + 3ME-MTT-ODE Offschore and Dredging Engineering) (2014). 3D CFD simulations of trailing suction hopper dredger plume mixing: A parameter study of near-field conditions influencing the suspended sediment source flux. Marine Pollution Bulletin, 88(1-2), 47-61.
  35. Wit, L de (3ME-MTT-ODE Offschore and Dredging Engineering), Talmon, AM (3ME-MTT-ODE Offschore and Dredging Engineering) & Rhee, C van (CITG-HE-HSFR Hydraulic Structures & Flood Risk + 3ME-MTT-ODE Offschore and Dredging Engineering) (2014). 3D CFD simulations of trailing suction hopper dredger plume mixing: Comparison with field measurements. Marine Pollution Bulletin, 88(1-2), 34-46.
  36. Wit, L de (3ME-MTT-ODE Offschore and Dredging Engineering), Rhee, C van (3ME-MTT-ODE Offschore and Dredging Engineering + CITG-HE-HSFR Hydraulic Structures & Flood Risk) & Keetels, GH (3ME-MTT-ODE Offschore and Dredging Engineering) (2014). Turbulent interaction of a buoyant jet with cross-flow. Journal of Hydraulic Engineering (Reston), 140(12), 1-14.
Publications 2013
  1. Brouwers, RJP, Fulpen, ML van & Talmon, AM (2013). Restratification in hydraulic transport: is it a bend effect? In s.n. (Ed.), Wodcon XX: the art of dredging (pp. 1-13). s.l.: Woda.
  2. Giri, S, Ye, Q, Talmon, AM, Weij, D & Sieben, A (2013). Bedload transport direction induced by bed form orientation: large scale modelling. In Fukuoka (Ed.), Advances in river sediment research (pp. 231-238). London: Taylor and francis.
  3. Grunsven, F. & Talmon, AM (2012). Local anomalies in slip for slurry flow within pipes near the deposit limit velocity. In Ceda (Ed.), Ceda Dredging Days 2012: virtue, venture and vision in the coastal zone, abu dhabie, united arab emirates (pp. 1-12). s.l.: s.nl.
  4. Helmons, RLJ & Miedema, SA (2013). Rock cutting for deep sea mining : an extension into poromechanics. In C Hellmich, B Pichler & D Adam (Eds.), Biot Conference on Poromechanic (pp. 2381-2390). Reston: ASCE.
  5. Nobel, AJ & Talmon, AM (2012). Measurements of the stagnation pressure in the center of a cavitating jet. Experiments in Fluids: experimental methods and their applications to fluid flow, 52(2), 403-415.
  6. Radermacher, M, Goot, R van der, Rijks, D & Wit, L de (2013). The art of screening: effectiveness of silt screens. Terra et Aqua, 132, 3-12.
  7. Radermacher, M, Goot, R van der, Rijks, D & Wit, L de (2013). The art of screening: effectiveness of silt screens. In s.n. (Ed.), Wodcon xx: the art of dredging (pp. 3-12). s.l.: Woda.
  8. Sisson, R., Lacoste-Bouchet, P., Vera, M., Costello, MJ, Hedblom, E., Sheets, B., Nesler, D., Solseng, P., Fandrey, A., Kesteren, W., Talmon, AM & Sittoni, L. (2012). An analytical model for tailings deposition developed from pilot scale testing. In D. Sego, G.W. Wilson & N. Beier (Eds.), 3rd international oil sands tailings conference (pp. 53-63). s.l.: Iostc.
  9. Talmon, AM (2013). Analytical model for pipe wall friction of pseudo-homogenous sand slurries. International Journal for Numerical and Analytical Methods in Geomechanics, 37, 264-270.
  10. Talmon, AM & Bezuijen, A   (2013). Analytical model for the beam action of a tunnel lining during construction. International Journal for Numerical and Analytical Methods in Geomechanics, 31(2), 171-200.
  11. Talmon, AM & Bezuijen, A   (2013). Calculation of longitudinal bending moment and shear force for shanghai yangtze river tunnel: application of lessons from dutch research. Tunnelling and Underground Space Technology, 35, 161-171.
  12. Talmon, AM, Mastbergen, DR & Huisman, M (2013). Invasion of pressurized clay suspensions into granular soil. Journal of Porous Media, 16(4), 351-365.
  13. Talmon, AM & Bezuijen, A   (2013). Fluid grout and the logitudinal beam action of a tunnel lining. In s.n. (Ed.), 3rd international conference on computational methods in tunneling and subsurface engineering (pp. 729-733). Freiburg: Aedification publisher.
  14. Talmon, AM (2013). Incipient erosion of particle beds by yield-pseudo-plastic fluids. In J Sobota & H Eckstadt (Eds.), Transport and sedimentation of solid particles (pp. 147-155). Wroclaw: Wroclaw university and univ rostock.
  15. Talmon, AM, Sieben, A & Lugt, T van (2013). Toward a faster and cleaner fairway maintenance of dutch rivers. In s.n. (Ed.), Wodcon XX: the art of dredging (pp. 1-14). s.l.: Woda.
  16. Wijk, JM van, Rhee, C van & Talmon, AM (2013). Advances in the modelling of vertical hydraulic transport by a continuum description. In s.n. (Ed.), Wodcon XX: the art of dredging (pp. 1-10). s.l.: Woda.
  17. Wijk, JM van, Vercruijsse, PM, Lucieer, PA, Talmon, AM & Rhee, C van (2011). An experimental and numerical study of vertical hydraulic transport for deep sea mining applications. In A Csiti (Ed.), Ceda dredging days 2011-dredging an beyond (pp. 1-13). Rotterdam: Ceda.
  18. Wijk, JM van, Talmon, AM & Rhee, C van (2012). Flow assurance of vertical solid-liquid two phase riser flow during deep sea mining. In Otc (Ed.), Offshore technology conference (pp. 1-19). Houston, texas, usa: Otc.
  19. Wit, L de & Rhee, C van (2014). Testing an improved artificial viscosity advection scheme to minimise wiggles in large eddy simulation of buoyant jet in crossflow. Flow, Turbulence and Combustion, 92(3), 699-730.
  20. Wit, L de & Rhee, C van (2013). Detailed full scale simulations of near field overflow plume mixing. In s.n. (Ed.), Wodcon xx: the art of dredging (pp. 1-11). s.l.: woda.
  21. Wit, L de & Rhee, C van (2013). Large eddy simulation of pulsed buoyant jet in crossflow. In s.n. (Ed.), 14th european turbulence conference (pp. 1-2). s.l.: s.n..
  22. Wit, L de, Bliek, A.J. & Frieling, JH (2011). Monitoring the impact of land reclamation on siltation in an inland lake. In s.n. (Ed.), Ceda dredging days 2011 (pp. 1-11). Delft: Ceda.
Publications 2012
  1. Miedema, SA. Constructing the shields curve part a: fundamentals of the sliding, rolling and lifting mechanisms for the entrainment of particles. Journal of Dredging Engineering, 12(1), 1-49
  2. Miedema, SA. Constructing the shields curve part B:sensitivity analysis, exposure & protrusion levels, settling velocity, shear stress & friction velocity, erosion flux and laminar main flow. Journal of Dredging Engineering, 12(1), 50-95.
  3. Wit, L de & Rhee, C van &. Testing different advection schemes for coarse high re les simulations of jet in crossflow and coflow. In Geurts, B. (Ed.), Engineering turbulence measuring and modelling (pp. 1-5). s.l.: Ercoftac.
Publications 2011
  1. Bisschop, F, Visser, PJ, Rhee, C van & Verhagen, HJ (2011). Erosion due to high flow velocities: A description of relevant processes. In J McKee Smith & P Lynett (Eds.), Proceedings of 32nd Conference on Coastal Engineering, ICCE 2010 (pp. 1-10). s.l.: s.n..
  2. Bots, H, Talmon, AM & Sieben, J. (2011). Analysis of dune ploughing in rivers. In s.n. (Ed.), Ceda dredging days 2011 (pp. 1-11). Rotterdam: Ceda.
  3. Guo, J, Chen, X, Luo, W & Tooren, MJL van (2011). Review of uncertainty-based multidisiplinary design optimization methods for aerospace vehicles. Progress in Aerospace Sciences, 450-479.
  4. Miedema, SA & Ramsdell, RC (2011). Hydraulic transport of sand/shell mixtures in relation with the critical velocity. Terra et Aqua, 18-27.
  5. Sieben, J. & Talmon, AM (2011). Bed-load transport in obliquely dune-covered riverbeds. Journal of Hydraulic Research, 49(3), 317-324.
  6. Talmon, AM & Schut, RA (2011). Application of electrical resistance tomography in a sand-slurry loop. In s.n. (Ed.), Ceda dredging days 2011 (pp. 1-9). Rotterdam: Ceda.
  7. Talmon, AM (2010). Bed topography in river bends with suspended sediment transport: laboratory test. In s.n. (Ed.), Int. conf. waterway transport of russia: innovative approach for development (pp. 157-166). St. petersburg: St petersburg state university of waterways communiation.
  8. Talmon, AM (2011). Hydraulic resistance of sand-water mixture flow in vertical pipes. In J Sobota (Ed.), 15th international conference on trasnport and sedimentation of solid particles (pp. 137-147). Wroclaw: University Wroclaw.
  9. Talmon, AM & Rhee, C van (2011). Test set-up for irregular vertical hydraulic transport in deep ocean mining. In s.n. (Ed.), Proceedings of the asme 2011 30th international conference on ocean, offshore and arctic engineering (pp. 1-10). Rotterdam: Asme.
  10. Wijngaarden, AM van (2010). Upgrades and conversions of floating offshore units: an overview. In Imare and ina (Ed.), Inmarco-inavation 2010 (pp. 1-8). mumbai: imare.
  11. Wijngaarden, AM van (2011). Delft offshore glossary of acronyms-dogoa. Delft and Zoetemeer: Jointly published bij TUD and IRO.
Publications 2010
  1. Abdeli, M, Miedema, SA, Rhee, C van, Schott, DL & Alvarez Grima, M (2010). Discrete element method modelling of sand cutting (19). In J Dobson (Ed.), Proceedings of the 19th world dredging congres (pp. 616-635). Beijing,China: Chida.
  2. Hofstra, CF , Miedema, SA & Rhee, C van (2010). Particle trajectories near impeller blades in centrifugal dredge pumps. In J Dobson (Ed.), Proceedings of the 19th world dredging congres (pp. 765-778). Beijing,China: Chida.
  3. Lloyd Jones, D, Rhee, C van & Gibbs, T (2010). Mitigation of marine aggregate - dredging impacts - benchmarking - equipment, practices and technologies agains global best practice. uk: Marine aggregate levy sustainability fund (malsf).
  4. Miedema, SA (2009). The effect of the bed rise velocity on the sedimentation process in hopper dredges. Journal of dredging engineering, 10(1), 10-31.
  5. Miedema, SA (2010). Constructing the shields curve, a new theoretical approach and its applications. In J Dobson (Ed.), Proceedings of the 19th world dredging congres (pp. 732-750). Beijing,China: Chida.
  6. Miedema, SA (2010). New developments of cutting theories with respect to offshore applications. In JS Chung, R Ayer, S Prinsenberg, SW Hong & I Langen (Eds.), The proceedings of the twentieth (2010) international offshore and polar engineering conference (pp. 694-701). Cupertino, california, usa: isope.
  7. Miedema, SA (2010). The effect of the bed rise velocity on the sedimentation process in hopper dredges. In J Dobson (Ed.), Proceedings of the 19th world dredging congres (pp. 598-615). Beijing,China: Chida.
  8. Miedema, SA (2010). The influence of the strain rate on cutting prcoesses. In JS Chung, R Ayer, S Prinsenberg, SW Hong & I Langen (Eds.), The proceedings of the twentieth (2010) international offshore and polar engineering conference (pp. 702-708). Cupertino, california, usa: isope.
  9. Pennekamp, JGS, Talmon, AM & Kesteren, WGM van (2010). Determination of non-segregatig tailings conditions. In J Dobson (Ed.), Proceedings of the 19th world dredging congres (pp. 848-858). Beijing,China: Chida.
  10. Primrose, KM, Qiu, C, Bolton, GT, Talmon, AM, Glen, N, Ross, A. & Learmouth, D (2010). Visualisation and measurement of 3 phase (air water oil) flow and 2 phase flow (sand water) with electrical tomography. In J Liu (Ed.), Proceedings of the 6th world congress on industrial process tomography (wcipt6) (pp. 1-11). s.l.: s.n..
  11. Rahman, M, Schott, DL, Miedema, SA & Lodewijks, G (2010). Simulation of cutting process by hybrid granular and multibody dynamics software. In M Dröttboom (Ed.), International conference on storing, handling and transporting bulk (pp. 1-8). Wurzburg: Vogel business media.
  12. Ramsdell, RC & Miedema, SA (2010). Hydraulic transport of sand/shell mixtures. In J Dobson (Ed.), Proceedings of the 19th world dredging congres (pp. 1039-1). Beijing,China: Chida.
  13. Rhee, C van (2010). Sediment entrainment at high flow velocity. Journal of hydraulic research, 136(9), 572-582.
  14. Rhee, C van (2010). Numerical simulation of the bottom discharge process of a trailing suction hopper dredge (19). In J Dobson (Ed.), Proceedings of the 19th world dredging congres (pp. 696-711). Beijing,China: Chida.
  15. Rhee, C van & Talmon, AM (2010). Sedimentation and erosion of sediment at high solids concentration. In N Heywood (Ed.), 18th international conference on hydrotransport (pp. 211-222). Bedfordshire, uk: bhr group limited.
  16. Schrieck, GLM van der & Rhee, C van (2010). Physical scale modeling of dredging processes in sand and gravel. In s.n. (Ed.), 19th World Dredging Congress (pp. 859-874). s.l.: s.n..
  17. Talmon, AM (2010). Regarding "are capillary tube data valid for suspension flows? by pullum et al". Korea-australia rheology journal, 22(3), 169-171.
  18. Talmon, AM, Vlasblom, WJ & Burger, M den (2010). Cutter production and kinematics of mixture forming. In J Dobson (Ed.), Proceedings of the 19th world dredging congres (pp. 838-847). Beijing,China: Chida.
  19. Wit, L de (2010). Near field 3d cfd modelling of overflow plumes. In J Dobson (Ed.), Proceedings of the 19th world dredging congres (pp. 712-723). Beijing,China: Chida.
Publications 2009
  1. Bisschop, F, Visser, PJ & Rhee, C van (2009). Hindered erosion of granular sediments. In s.n. (Ed.), Ceda dredging days 2009-dredging tools for the future (pp. 1-12). Delft: Central dredging association.
  2. Hofstra, CF , Rhee, C van, Miedema, SA & Talmon, AM (2008). On the particle trajectories in dredge pump impellers. In J Sobota, S Ivanov & V Alexandrov (Eds.), Proceeding of the 14th international conference on transport & sedimentation of solid particles (pp. 157-163). sain petersburg: Saint petersburg state mining institute.
  3. Miedema, SA (2008). A sensitivity analysis of the production of clamshells. Journal of dredging engineering, 9(1), 21-43.
  4. Miedema, SA (2008). A sensitivity analysis of the production of clamshells. In R.E. randall (Ed.), Proceedings of the western dredging association twenty-eighth technical conference & thirty-ninth texas a&m dredging seminar (pp. 181-200). Texas, usa: Center for dredging studies.
  5. Miedema, SA (2009). A sensitivity analysis of the scaling of tshd's. In RE Randall (Ed.), Proceedings of the western dredging association 29 technical conference &40th texas a&m dredging seminar (pp. 54-70). Texas, usa: Center for dredging studies.
  6. Miedema, SA (2008). An analytical method to determine scour. In R.E. randall (Ed.), Proceedings of the western dredging association twenty-eighth technical conference & thirty-ninth texas a&m dredging seminar (pp. 19-38). Texas, usa: Center for dredging studies.
  7. Miedema, SA (2009). New developments of cutting theories with respect to dredging the cutting of clay and rock. In RE Randall (Ed.), Proceedings of the western dredging association 29 technical conference &40th texas a&m dredging seminar (pp. 21-36). Texas, usa: Center for dredging studies.
  8. Mol, JN, Talmon, AM & Hemmen, A.J.M. (2009). Using flocculants to enclose silt particles in the pore volume of sand. In s.n. (Ed.), Ceda dredging days 2009-dredging tools for the future (pp. 1-9). Delft: Central dredging association.
  9. Rhee, C van (2008). Transport and sedimentation in the industry of dredging. In J Sobota, S Ivanov & V Alexandrov (Eds.), Proceeding of the 14th international conference on transport & sedimentation of solid particles (pp. 55-64). sain petersburg: Saint petersburg state mining institute.
  10. Talmon, AM & Bezuijen, A (2009). Simulating the consolidation of tbm grout at noordplaspolder. Tunnelling and underground space technology, 24(5), 493-499.
  11. Talmon, AM (2008). Boundary layer theory for solid-liquid mixtures tested against couette flow. In J Sobota, S Ivanov & V Alexandrov (Eds.), Proceeding of the 14th international conference on transport & sedimentation of solid particles (pp. 293-300). sain petersburg: Saint petersburg state mining institute.
  12. Talmon, AM, Bezuijen, A & Hoefsloot, F.J.M. (2008). Longitudinal tube bending due to grout pressures. In CWW Ng, HW Huang & GB Liu (Eds.), Geotechnical aspects of underground construction in soft ground (IS Shanghai 2008) (pp. 255-260). Shanghai: Tongji University.
  13. Talmon, AM (2008). Boren in het verzadigde land. De Onderbouwing, 1(2), 43-43.
  14. Talmon, AM (2009). Two-phase boundary layer model tested against couette flow measurements. Journal of the St Petersburg state university of waterways communications, 69-75.
  15. Vinke, FRS, Nobel, AJ & Talmon, AM (2009). Water jets surrounded by an air film. In s.n. (Ed.), Ceda dredging days 2009-dredging tools for the future (pp. 1-9). Delft: Central dredging association.
  16. Zhi, Liu, Fusheng, Ni & Miedema, SA (2009). Optimized design method for tshd's swell compensator basing on modeling and simulation. In Q Luo & QH Zhou (Eds.), International conference on industrial mechatronics and automation (pp. 48-52). new york, usa: ieee
Publications 2008
  1. Aarninkhof, SGJ, Rosenbrand, WF, Rhee, C van & Burt, TN (2007). The day after we stop dredging: A world without sediment plumes? In CEDA (Ed.), Ceda Dredging Days 2007 - The day after we stop dredging Dredging for infrastructure and public welfare (pp. 1-14). Delft: CEDA.
  2. Bezuijen, A & Talmon, AM (2008). Processes around a tbm. In CWW Ng, HW Huang & GB Liu (Eds.), Geotechnical Aspects of Underground Construction in Soft Ground (IS Shanghai 2008) (pp. 1-11). Shanghai: Tongji university/ISSMGE.
  3. Bezuijen, A & Talmon, AM (2008). Processes around a tbm. Geotechniek, 3, 48-56.
  4. Cartigny, MJB, Talmon, AM, Delfos, R, Vlasblom, WJ & Rosenbrand, WF (2007). On the relation between hydraulic losses due to bends and mixture stratification. In CEDA (Ed.), Ceda Dredging Days 2007 - The day after we stop dredging - Dredging for infrastructure and public welfare (pp. 1-8). Delft: CEDA.
  5. Fusheng, Ni, Lijuan, Z, Liqun, X & Vlasblom, WJ (2008). A model calculation for flow resistance in the hydraulic transport of sand. In R.E. PHD Randall (Ed.), Proceedings of the 18th World dredging Congress (pp. 1377-1384). Texas, USA: Newman Printing Company.
  6. Ma, Y, Ni, F & Miedema, SA (2006). Mechanical model of water saturated sand cutting at blade large cutting angles. Journal of hohai university changzhou, 20(3), 59-61.
  7. Miedema, SA (2008). An analytical approach to the sedimentation process in trailing suction hopper dredgers. Terra et aqua, 15-25.
  8. Miedema, SA & Rhee, C van (2008). A sensitivity analysis on the effects of dimensions and geometry of trailing suction hopper dredges. In R.E. PHD Randall (Ed.), Proceedings of the 18th World dredging Congress (pp. 39-52). Texas, USA: Newman Printing Company.
  9. Miedema, SA, Lagers, GHG & Kerkvliet, J (2008). An overview of drag embedded anchor holding capacity for dredging and offshore applications. In R.E. PhD Randall (Ed.), Proceedings of the 18th World dredging Congress (pp. 245-274). Texas: Newman Printing Company.
  10. Miedema, SA, Lagers, GHG & Kerkvliet, J (2008). An overview of drag embedded anchor holding capacity for dredging and offshore applications. In R.E. PHD Randall (Ed.), Proceedings of the 18th World dredging Congress (pp. 245-274). Texas, USA: Newman Printing Company.
  11. Rhee, C van (2002). Modelling the sedimentation process in a trailing suction hopper dredger. Terra et aqua, 86, 18-27.
  12. Talmon, AM & Bezuijen, A (2008). Backfill grouting reseach at Groene Hart Tunnel. In CWW Ng, HW Huang & GB Liu (Eds.), Geotechnical Aspects of Underground Construction in Soft Ground (IS Shanghai 2008) (pp. 249-254). Shanghai: Tongji university/ISSMGE.
Publications 2007
  1. Burger, M den (3mE Section Dredging Engineering) (2003, juni 03). Mixture forming processes in dredge cutter heads. TUD Technische Universiteit Delft (212 pag.)
  2. Kesteren, WGM (extern), Talmon, AM (3mE Section Dredging Engineering), Pennekamp, JGS (extern), Costello, MJ (extern) & Flynn, WA (extern) (2007). Dredged material placement under non-segregating conditions. In s.n. (Ed.), Proceedings of the World Dredging Conference (WODCON XVIII)  (pp. 1559-1570).
  3. Matousek, V (3mE Section Dredging Engineering) (1997, december 15). Flow mechanism of sand-water mixtures in pipelines. TUD Technische Universiteit Delft (258 pag.) (Delft: Delft University Press).
  4. Miedema, SA (3mE Section Dredging Engineering) (2007). Self-evaluation of the offshore engineering master of science degree curriculum at the Delft University of Technology. CROHO 60178. Delft: TU Delft.
  5. Nobel, AJ (3mE Section Dredging Engineering), Talmon, AM (3mE Section Dredging Engineering) & Vlasblom, WJ (3mE Section Dredging Engineering) (2007). Cavitating jets for dredging clay? In s.n. (Ed.), Proceeding of the 17th International Conference on Hydrotransport 17  (pp. 531-550). Cranfield, Bedfordshire, UK: BHR Group Limited.
  6. Rhee, C van (3mE Section Dredging Engineering) (2007). Erosion of granular sediments at high flow velocity. In s.n. (Ed.), Proceeding of the 17th International Conference  (pp. 1-10). UK: BHR Group.
  7. Rhee, C van (3mE Section Dredging Engineering) (2001). Modelling the sedimentation process in a trailing suction hopper dredge. In E.E. Michaelides (Ed.), 4th International conference on multiphase flow  (pp. 1-11). s.l.: ICMF.
  8. Rhee, C van (3mE Section Dredging Engineering) (2004). Sediment settling and pick-up at a flow velocity below the deposition limit. In J.A.R. Muis (Ed.), Proceeding of the 16th International Conference  (pp. 1-12). UK: BHR Group.
  9. Rhee, C van (3mE Section Dredging Engineering) & Verhagen, SA (extern) (2004). The flow of buoyant plumes in a hopper. In P Vlasak & P Filip (Eds.), Proceedings of the 12th international conference on transport and Sedimentation of solid particles joined with the 12th int.sym. on freight pipelines  (pp. 1-8). Prague: Institute of Hydrodynamics, Academy of Schiences of the Czech.
  10. Rhee, C van (3mE Section Dredging Engineering), Angremond, K d (CiTG Sect. Hydraulic Engineering) & Lubking, P (extern) (2002). The influence of entrained air on sedimentation in salt and fresh water. In JM Smith (Ed.), Proceedings of the28th International Conference Coastal Engineering 2002  (pp. 2554-2564). USA: US Army Engineer Research and Development Center.
  11. Talmon, AM (3mE Section Dredging Engineering), Aanen, L (extern) & Bakker-Vos, R (extern) (2007). Laboratory tests on self-excitation of concentration fluctuations in slurry pipelines. Journal of hydraulic research, 45(5), 653-660.
  12. Wal, T van der (extern), Bouwmeester, D(extern) (extern), Vrouwenvelder, ACWM (CiTG Sect. Structural Mechanics), Peuchen, J(extern) (extern), Baars, S van (CiTG Sect. Geo-engineering) & Lagers, GHG   (3mE Section Dredging Engineering) (2007). A probabilistic approach for geotechnical assessment of jacj-up leg penetration. In s.n. (Ed.), Proceedings of the 6th international offshore site investigation and geotechnics xonference  (pp. 515-520). London: OSIG Group of the SUT.
  13. Walstra, DJR (CiTG Sect. Hydraulic Engineering), Rijn, LC van (extern), Ormondt, M van (extern), Briere, C (extern) & Talmon, AM (3mE Section Dredging Engineering) (2007). The effects of bed slope and wave skewness on sediment transport and morphology. In NC Kraus & J Dean Rosati (Eds.), Proceedings of the sixth international symposium on coastal engineering and science of coastal sediment processes  (pp. 1-14). Reston, USA: ASCE.
  14. Miedema, S.A., Lagers, G.H.G., Kerkvliet, J., “An Overview of Drag Embedded Anchor Holding Capacity for Dredging and Offshore Applications”.  WODCON, Orlando, USA, 2007.
  15. Miedema, S.A., Rhee, C. van, “A SENSITIVITY ANALYSIS ON THE EFFECTS OF DIMENSIONS AND GEOMETRY OF TRAILING SUCTION HOPPER DREDGES”. WODCON ORLANDO, USA, 2007.
  16. MA Ya-sheng, NI Fu-sheng, S.A. Miedema, "Mechanical Model of Water Saturated Sand Cutting at Blade Large Cutting Angles", Journal of Hohai University Changzhou, ISSN 1009-1130, CN 32-1591, 2006.
    绞刀片大角度切削水饱和沙的力学模型, 马亚生[1] 倪福生[1] S.A.Miedema[2], 《河海大学常州分校学报》-2006年20卷3期 -59-61页
Publications 2006
  1. Miedema, S.A., "THE CUTTING OF WATER SATURATED SAND, THE SOLUTION". CEDA African Section: Dredging Days 2006 - Protection of the coastline, dredging sustainable development, Nov. 1-3, Tangiers, Morocco.
  2. Miedema, S.A., "La solution de prélèvement par désagrégation du sable saturé en eau". CEDA African Section: Dredging Days 2006 - Protection of the coastline, dredging sustainable development, Nov. 1-3, Tangiers, Morocco.
  3. Miedema, S.A. & Vlasblom, W.J., "THE CLOSING PROCESS OF CLAMSHELL DREDGES IN WATER-SATURATED SAND". CEDA African Section: Dredging Days 2006 - Protection of the coastline, dredging sustainable development, Nov. 1-3, Tangiers, Morocco.
  4. Miedema, S.A. & Vlasblom, W.J., "Le processus de fermeture des dragues à benne preneuse en sable saturé". CEDA African Section: Dredging Days 2006 - Protection of the coastline, dredging sustainable development, Nov. 1-3, Tangiers, Morocco.
  5. Miedema, S.A. "THE CUTTING OF WATER SATURATED SAND, THE SOLUTION". The 2nd China Dredging Association International Conference & Exhibition, themed 'Dredging and Sustainable Development' and in Guangzhou, China, May 17-18 2006.
  6. Ma, Y, Ni, F. & Miedema, S.A., "Calculation of the Blade Cutting Force for small Cutting Angles based on MATLAB". The 2nd China Dredging Association International Conference & Exhibition, themed 'Dredging and Sustainable Development' and in Guangzhou, China, May 17-18 2006.
  7. ,"". The 2nd China Dredging Association International Conference & Exhibition, themed 'Dredging and Sustainable Development' and in Guangzhou, China, May 17-18 2006.
  8. Miedema, S.A. , Kerkvliet, J., Strijbis, D., Jonkman, B., Hatert, M. v/d, "THE DIGGING AND HOLDING CAPACITY OF ANCHORS". WEDA XXVI AND TAMU 38, San Diego, California, June 25-28, 2006.
  9. Schols, V., Klaver, Th., Pettitt, M., Ubuan, Chr., Miedema, S.A., Hemmes, K. & Vlasblom, W.J., "A FEASIBILITY STUDY ON THE APPLICATION OF FUEL CELLS IN OIL AND GAS SURFACE PRODUCTION FACILITIES". Proceedings of FUELCELL2006, The 4th International Conference on FUEL CELL SCIENCE, ENGINEERING and TECHNOLOGY, June 19-21, 2006, Irvine, CA.
  10. Miedema, S.A., "Polytechnisch Zakboek 51ste druk, Hoofdstuk G: Werktuigbouwkunde", pG1-G88, Reed Business Information, ISBN-10: 90.6228.613.5, ISBN-13: 978.90.6228.613.3. Redactie: Fortuin, J.B., van Herwijnen, F., Leijendeckers, P.H.H., de Roeck, G. & Schwippert, G.A.
  11. Bezuijen A., and A.M.Talmon, 2006, Calculation models based on monitoring during tunnel construction, proceedings ITA-AITES World Tunnel Congress & 32nd ITA general Assembly, Seoul, South Korea.
  12. Bezuijen A., and A.M.Talmon, 2006, Calculation models based on monitoring during tunnel construction, extended abstract, J. Tunnelling and Underground Space Technology, including Horizontal Directional Drilling, vol. 21, issues 3-4, pp380-381.
  13. Vlasblom W.J. and A.M. Talmon, 2006, Spillage problems of cutter suction dredgers, Proc. 2nd Chinese International Dredging Congress, Guangzhou, China.
  14. Talmon A.M. and J.-U. Wiesemann, 2006, Influence of grain size on the direction of bed-load transport on transverse sloping beds, Third. Int. Conf. on Scour and Erosion, Nov 1-3 Amsterdam, pp 632-639. ISBN-10 90-376-0503-6, ISBN-13 978-90-376-0503-7.
  15. Talmon A.M., 2006, Modelling the influence of suspension stratification on turbulent mixing in pipelines, 13th Int. Conf. on Transport and Sedimentation of Solid Particles, Tbilisi, Georgia.
Publications 2005
  1. Verheul, O. & Vercruijsse, P.M. & Miedema, S.A., "A new concept for accurate and efficient dredging in deep water". Ports & Dredging, IHC, 2005, E163.
  2. Miedema, S.A., "Scrapped?". Dredging & Port Construction, September 2005.
  3. Miedema, S.A. & Vlasblom, W.J., " Bureaustudie Overvloeiverliezen". In opdracht van Havenbedrijf Rotterdam, September 2005, Confidential.
  4. He, J., Miedema, S.A. & Vlasblom, W.J., "FEM Analyses Of Cutting Of Anisotropic Densely Compacted and Saturated Sand", WEDAXXV & TAMU37, New Orleans, USA, June 2005. 
  5. Miedema, S.A., "The Cutting of Water Saturated Sand, the FINAL Solution". WEDAXXV & TAMU37, New Orleans, USA, June 2005.
  6. Miedema, S.A. & Massie, W., "Selfassesment MSc Offshore Engineering", Delft University of Technology, October 2005.
  7.  Burger, M. den, Vlasblom, W.J., Talmon, A.M. “Design aspects for cutter heads related tot the mixture forming process when cutting coarse materials” Terra et Aqua, number 98, mart 2005, blz 12-18 ISSN 0376-6411
  8.  Prof.ir. W.J. Vlasblom “Dredging Engineering; theory and practice of sedimentation and reclamation” Current Geotechnical Issues of Thick Clay Deposits, Korean Geotechnical Society, Korea, Busan, 21 en 22 sept. 2005, blz. 227 – 252
  9. Talmon A.M. and M. Huisman, 2005, Fall velocity of particles in shear flow of drilling fluids, J. Tunnelling and Underground Space Technology, including Horizontal Directional Drilling, vol. 20, no2, pp193-201 Elsevier
  10.  A.M. Talmon , Bezuijen A. 2005, Grout properties and their influence on back fill grouting, 5th int. Symp. Geotechnical Aspects of Underground Construction in Soft Ground, 15-17 June, ISSMGE-TC28, Amsterdam, session blz 7-12
  11. Bezuijen A., Joustra, J.F.W., Talmon, A.M. and B. Grote, 2005, Pressure gradients and muck properties at face of an EPB, 5th int. Symp. Geotechnical Aspects of Underground Construction in Soft Ground, 15-17 June, ISSMGE-TC28, Amsterdam, session 2, 13-18
  12. Talmon A.M. and A. Bezuijen, 2005, Grouting the tail void of bored tunnels: the role of hardening and consolidation of grouts, 5th int. Symp. Geotechnical Aspects of Underground Construction in Soft Ground, 15-17 June, ISSMGE-TC28, Amsterdam, session 2, 125-130
  13. Bezuijen A., Joustra, J.F.W., Talmon, A.M. and B. Grote, “Pressure gradients at the tunnel face of an Earth Pressure Balance shield”, proceedings of the 31st ITA-AITES world Tunnel congress, 7-12 may 2005 Instanbul, Turkey, blz 809-814
  14.  A.M. Talmon , Bezuijen A, “Laboratory testing of grout properties and their influence on back fill grouting”, proceedings of the 31st ITA-AITES world Tunnel congress, 7-12 may 2005 Instanbul, Turkey, blz 941-948
  15. Talmon, A.M. and A. Bezuijen A “Monitoring and modelling during tunnel construction” 16th Int. conf. On Soil Mechanics and Geotechnical Engineering, 12-16 sept. 05, Osaka, Japan
  16. Talmon A.M., Aanen, L, Bezuijen, A, Zon, W.H. van der “Grout pressures around a tunnel lining” Boek Tunneling A Decade of progress GeoDelft 95-05, blz 77 – 82
  17. Talmon A.M., Bezuijen, A, Kaalberg, F.J., Plugge. R. “Field measurements of grout pressures during tunnelling of the Sophia Rail Tunnel” Boek Tunneling A Decade of progress GeoDelft 95-05, blz 83-93
  18. Talmon A.M., Bezuijen, A, “Grout the foundation of a bored tunnel” Boek Tunneling A Decade of progress GeoDelft 95-05, blz 95-100
  19. Talmon A.M., Bezuijen, A, “Grout pressures around a tunnel lining, influence of grout consolidation and loading on lining” Boek Tunneling A Decade of progress GeoDelft 95-05, blz 109-114
  20. Talmon A.M., Bezuijen, A “Laboratory testing of grout properties and their influence on backfill grouting” ” Boek Tunneling A Decade of progress GeoDelft 95-05, blz 115 – 121
  21. Talmon A.M., Bezuijen, A “Muck discharge by the screw conveyor of an EPB Tunnel Boring machine” ” Boek Tunneling A Decade of progress GeoDelft 95-05, blz 165-170
  22. Nobel A.J., and Vlasblom W.J. , Jetting in clay. CEDA Dredging Days November 2005, Rotterdam, The Netherlands.
  23. Vlasblom W.J., Hoff J. van 't, and Rhee C. van , Quality improvement of dredged sand on board a trailing suction hopper dredger. CEDA Dredging Days November 2005, Rotterdam, The Netherlands.
  24. Geus A.M. de, Matousek V., Berg C.H. van den and Vlasblom W.J., Determination of the solids-concentration profile in slurry pipe using radiometric method. CEDA Dredging Days November 2005, Rotterdam, The Netherlands.
  25. Matoušek, V. (2005). Research developments in pipeline transport of settling slurries. Powder Technology, Vol. 156, No. 1, pp. 43-51, Elsevier (ISSN 032-5910).
  26. Lee, M.S., Matoušek, V., Chung, C.K. and Lee, Y.N. (2005). Pipe size effect on hydraulic transport of Jumoonjin sand – experiments in a dredging test loop. Terra et Aqua, No. 99, pp. 3-10 (ISSN 0376-6411). LI size>
  27. Matoušek, V. (2005). Pipe-wall friction in vertical sand-slurry flows. 9th International Symposium on Liquid-Solid Flows, 2005 ASME Fluids Engineering Division Summer Meeting and Exhibition, Houston (Proceedings on CD-ROM).
  28. Zijl P.M.N. van, Vlasblom W.J., Gijt J.G. de, Broos E.J. and Boer J. de , Extreme long geotubes. CEDA Dredging Days November 2005, Rotterdam, The Netherlands.
  29. Vercruijsse P.M., Versteeg G.J.P, Ooijens S.C., Hofstra C.F, Lin F. and Kramers C.H.M., Wild Dragon®. Developing a draghead for dredging extreme fine, hard packed aquatic soils. CEDA Dredging Days November 2005, Rotterdam, The Netherlands.
Publications 2004
  1. Miedema, S.A. & Frijters, D.D.J., "The wedge mechanism for cutting of water saturated sand at large cutting angles". WODCON XVII, September 2004, Hamburg Germany.
  2. Verheul, O. & Vercruijsse, P.M. & Miedema, S.A., "The development of a concept for accurate and efficient dredging at great water depths". WODCON XVII, September 2004, Hamburg Germany.
  3. Miedema, S.A., "THE CUTTING MECHANISMS OF WATER SATURATED SAND AT SMALL AND LARGE CUTTING ANGLES". International Conference on Coastal Infrastructure Development - Challenges in the 21st Century. HongKong, november 2004.
  4. Ir. M. Zwanenburg , Dr. Ir. S.A. Miedema , Ir J.D. Holstein , Prof.ir. W.J.Vlasblom, "REDUCING THE DAMAGE TO THE SEA FLOOR WHEN DREDGING COCKLE SHELLS". WEDAXXIV & TAMU36, Orlando, Florida, USA, July 2004.
  5. Schott, D.L., Wijk, L.A. van, Vlasblom, W.J. “Compression in mammoth silos – The influence of compression on large-schale homogenisation” Powder Technology 142 (2004) 92-97 Elsevier
  6. Vlasblom, W.J. “Engineering Geology in International Dredging and Infrastructure” blz 190-202 , Liege 4-7 mei 2004, ISSN 0930-0317, ISBN 3-540-21075-X Springer-Verlag
  7. Vlasblom, W.J., Pinkster, J. “Dredgers”, ISBN 0-939773-41-4; Boek Ship Design and Construction, vol. II, The society of Naval Architects and Marine Engineering, USA, blz 51-1 / 51-52
  8. Schott, D.L., Wijk, L.A. van, Vlasblom, W.J. “Estimating the homogenization efficiency of mammoth silos by process dynamics and simulations comparing the results of process dynamics with the simulations” Elsevier Chemical Engineering and Processing 44 (2005) 297-302
  9. Vlasblom, W.J. “Long-distance pipeline transport of dredged material, and the Betuwe route from Rotterdam harbor to the German border. Workshop WEDA pp?? (problem geweest omdat er “draft” op kaft staat)
  10. Matoušek, V. (2004). Erosion of plane bed by sand slurry current in pipe. Journal of Hydrology and Hydromechanics, Vol. 52, No. 3, pp. 156-161 (ISSN 0042/790X).
  11. Matoušek, V. (2004). Medium-sand flow over plane stationary bed in 150-mm pipe. Proc. 16th Int. Conference on Hydrotransport, Santiago de Chile, pp. 561-569.
  12. Matoušek, V. (2004). Research developments in pipeline transport of settling slurries. Keynote lecture. Proc. 12th Int. Conference on Transport & Sedimentation of Solid Particles, Prague, pp. 19-34.
  13. Matoušek, V., Chara, Z. & Vlasak, P. (2004). On the effect of particle size and pipe size on slurry-flow friction. Proc. 12th Int. Conference on Transport & Sedimentation of Solid Particles, Prague, pp. 509-517.
  14. Stienen, F.G.A., Matoušek, V. and Rhee, C. van (2004). Simulation of solids behaviour at wall of circular slurry pipe using DEM. Proc. 12th Int. Conference on Transport & Sedimentation of Solid Particles, Prague, pp. 621-630.
  15. Lee, M.S., Matoušek, V., Chung, C.K. & Lee, Y.N. (2004). Pipe size effect of hydraulic transport of Jumoonjin sand - experiments in dredging test loop. Proc. 17th World Dredging Congress, Hamburg, Germany (proceedings on CD-ROM). ISBN 90-9018244-6
  16. Sloot, S.F. & Vlasblom, W.J. & Gool, V.C. van, "Study on the feasibility of an active draghead for rock dredging". WODCON XVII, September 2004, Hamburg Germany. (proceedings on CD-ROM). ISBN 90-9018244-6
Publications 2003

International conference papers

  1. S. Miedema, D. Frijters “The Mechanism of Kinematic Wedges at Large Cutting Angles-Velocity and Friction Measurements” Western Dredging Association Twenty-third technical conference & Thirty-fifth texas A&M Dredging Seminar, Chicago, Illinois, June 10-13, 2003, 111-125 blz
  2. Y. Ma, S. Miedema, V. Matoušek, W. Vlasblom “Tomography as a Measurement Method for Density and Velocity Distributions” Western Dredging Association Twenty-third technical conference & Thirty-fifth texas A&M Dredging Seminar, Chicago, Illinois, June 10-13, 2003, 25-36 blz
  3. Z. Lu, V. Matoušek, S. Miedema “Numerical Simulation of a Development of a Density Wave in a Long Slurry Pipeline” Western Dredging Association Twenty-third technical conference & Thirty-fifth texas A&M Dredging Seminar, Chicago, Illinois, June 10-13, 2003, 99-109 blz
  4. Schott, D.L.; Van Wijk, A.L.; Vlasblom, W.J. ; “Estimating the homogenization efficiency of mammoth silos using process dynamics”, The 4th international conference for conveying and handling of particulate solids; Budapest, 27-30 May, 2003, 9.20-9.25 blz
  5. Oosterhuis, E.J. Schott, D.L.; Van Wijk, A.L.; “The reclaim screw in mammoth silos operating on a free surface: comparison between horizontal and inclined operation on free flowing bulk solids” The 4th international conference for conveying and handling of particulate solids; Budapest, 27-30 May, 2003; 14.35-14.40 blz
  6. M. Vredevoort, V. Matoušek, T. van Doorn: "Coherency of Jets Produced by Draghead Nozzles” Ceda Dredging Days 2003, Amsterdam RAI, 149-163blz, 20-21 november 2003
  7. M.S. Lee, V. Matoušek, C.K. Chung, Y.N. Lee "Hydraulic Transport of Jumoonjijn Sand-Experiments in Hyundai Dredging Test Loop” Ceda Dredging Days 2003 Amsterdam RAI, 165-174 blz, 20-21 november 2003
  8. G.A.P.L. Teheux, W.J. Vlasblom "Development of a BI-Stage Dreaghead – The comparison of different jet-configurations in a dreaghead” Ceda Dredging Days 2003 Amsterdam RAI 175-183 blz, 20-21 november 2003
  9. M. Zwanenburg, J.D. Holstein, S.A. Miedema, W.J. Vlasblom "The Exploitation of Cockle Shells: Ceda Dredging Days 2003 Amsterdam RAI: 185-196 blz, 20-21 november 2003
  10. Marco den Burger, Arno M. Talmon "Particle trajectories along a cutter head blade, using the results of a CFD model for the flow” Dredging ’02 Key Technologies for Global Prosperity, Orlando, Florida, blz 1-13, 5-8 mei 2002 (alleen CD ROM)
  11. Vaclav Matoušek "The pipeline transport of different sand fractions in dense slurries”, Dredging ’02 Key Technologies for Global Prosperity, Orlando, Florida, blz 1-10, 5-8 mei 2002 (alleen CD ROM)
  12. S.A. Miedema “The cutting of water saturated sand at large cutting angles” Dredging ’02 Key Technologies for Global Prosperity,Orlando, Florida, blz 1-16, 5-8 mei 2002 (alleen CD ROM)
  13. V. Matoušek " Effect of solids distribution near a pipe wall on flow friction in a slurry pipeline” The 4th International conference for conveying and handling of particulate solids; H. Kalman & J. Gyenis; Hotel Inter-Continental, Budapest, Hongarije; 13.19-13.24 blz; 27-30 mei 2003
  14. V. Matoušek: “Challenges in Research on Pipeline Transport of Solids Using Modern Dredging Equipment”, The first Chinese international dredging congress and exhibition”, Shanghai, China, blz 147-157, 26-29 november 2003
  15. Liu Zhi, S.A. Miedema, W.J. Vlasblom, C.H. Verheul: “Modeling and simulation of the dynamic behavior of TSHD’s suction pipe system by using ADAMS” The first Chinese international dredging congress and exhibition, Shanghai, China, blz 538-548, 26-29 november 2003
  16. W.J. Vlasblom, “Investigations to the spillage of the horizontal suction process”The first Chinese international dredging congress and exhibition”, Shanghai, China, blz 559-566, 26-29 november 2003
  17. S.A. Miedema: “The existence of kinematic wedges at large cutting angles a continuing study”:The first Chinese international dredging congress and exhibition, Shanghai, China: Blz 586-601, 26-29 november 2003.

Third party reports: 

  1. Vlasblom, W.J., Verhoef, P.N.W. “Interpretation site investigation data geraldton port enhancement project” 2003.BT.6726
  2. Vlasblom, W.J., Hof, ir. J. van ‘t “Voorscheiden van Noordzeezand ten behoeve van beton- en metselzand” eindrapportage, juli 2003, 2003.BT.6723
  3. Matoušek, V.. Determination of diameters for suction‑ and discharge pipes connected with CSD and THSD. Report No. 2003.BT.6731 for MTI Holland.
  4. Matoušek, V.. Initial laboratory tests on a development of a density wave in a slurry pipeline. Report No. 2003.BT. 6832 for Royal Boskalis BV.
  5. Miedema, S.A., Willemse, H.R., "Report on MHO5/6 Mission to Vietnam". Delft University of Technology and CICAT, Delft Januari 2003.
  6. Tri, Nguyen Van, Miedema, S.A., Heijer, J. den, "Machine Manufacturing Technology". Lecture notes, Delft University of Technology, Cicat and Cantho University Vietnam, August 2003.
  7. Miedema, S.A., "MHO5/6 Phase Two Mission Report". Report on a mission to Cantho University Vietnam October 2003. Delft University of Technology and CICAT, November 2003.

Journal Papers:

  1.   Vlasblom, W.J, Dekker, M.A., Kruyt, N.P., Burger, M. den “Experimental and Numercial Investigation of Cutter Head Dredging Flows”, Journal of Waterway, Port, Coastal, and Ocean engineering, sept/okt 2003 Volume 129, number 5, blz 203 – 209
  2. Schott, D.L.; Van Wijk, A.L.; “Small scale homogenization in mammoth silos International journal of storing, Handling and Transporting Bulk (bulk solids handling)”; Trans tech publications 23, no.3, 2003; 158-161 blz; ISSN: 0173-9980
  3. Schott, D.L.; Van Wijk, A.L.; Kraaikamp, C.: “Large-scale homogenization in mammoth silos: calculating homogenization efficiency and modeling input properties”; International Journal of Mineral Processing:Elsevier vol. 71, 2003, 179-199 blz; ISSN 0301-7516
  4. Lu, Z., Miedema, S.A. & Matoušek, V. (2003). Numerical simulation of the development of density waves in a long pipeline and the dynamic system behaviour. Terra et Aqua, No. 93, p. 11-23.
Publications 2002
  1. Vlasblom, W.J., e.d. i.s.m. IHC: ?Ontwerp aspecten van baggerinstallaties?, Delft, 19 maart 2002.
  2. Vlasblom, W.J., i.o.v. RWS: ?2e opinie m.b.t. het dieponderzuigen t.b.v. van de zandwinning op het IJsselmeer?, 2 april 2002, 2002.BT.5613
  3. Miedema, S.A., & Riet, E.J. van, & Matousek, V., "Theoretical Description And Numerical Sensitivity Analysis On Wilson Model For Hydraulic Transport Of Solids In Pipelines 2002 WEDA Journal/2002 DredgingEngineering Wilson 2002 WEDA Journal of Dredging Engineering, March 2002.
  4. Miedema, S.A., & Ma, Y., "The Cutting of Water Saturated Sand at Large Cutting Angles 2002 Dredging02/2002. Proc. Dredging02, May 5-8, Orlando, Florida, USA.
  5. Miedema, S.A., & Lu, Z., "The Dynamic Behavior of a Diesel Engine 2002 WEDA TAMU Diesel/2002. Proc. WEDA XXII Technical Conference & 34th Texas A&M Dredging Seminar, June 12-15, Denver, Colorado, USA.
  6. Miedema, S.A., & He, Y., "The Existence of Kinematic Wedges at Large Cutting Angles 2002 WEDA TAMU Cutting/2002. Proc. WEDA XXII Technical Conference & 34th Texas A&M Dredging Seminar, June 12-15, Denver, Colorado, USA.
  7. Schott, D.L. A.W. Gerstel, ?Upgrading of Buk Material in Mammoth Silos?, Tijdschrift Port Technology International, edition 17, autumn 2002, blz 109-116, ISSN 1358 1759
  8. Y. Ma, W.J. Vlasblom, S.A. Miedema, V. Matousek ?Measurement of Density and Velocity in Hydraulic Transport using Tomography?, Dredging Days 2002, Dredging without boundaries, blz V1-V12, 22-24 October 2002
  9. A.A.G. Velthoen, W.J. Vlasblom, W.F. Rosenbrand ?Modelling Loads on a selective excavation unit working underneath an overburden? Dredging Days 2002, Dredging without boundaries, Casablanca, Morocco, V64-V73, 22-24 October 2002
  10. Cees van Rhee, ?On the sedimentation process in a trailing suction hopper dredger?, 3-12-2002, Delft promotie
  11. Matousek, V. ?The Pipeline Transport of Different Sand Fractions in Dense Slurries?. Proc. Dredging02, May 5-8, Orlando, Florida, USA
  12. Matousek, V. ?Non-stratified Flow of Sand-Water Slurries?. Proc. 15th Int. Conference on Hydrotransport, pp. 563-74, June 2002, Banff, Canada, 3-5 juni 2002
  13. Matousek, V. ?Partially Stratified Flow with Turbulent Suspernsion in a Pipe?. Proc. 11th Int. Conference on Transport & Sedimentation of Solid Particles?, pp. 391-8, September 2002, Ghent, Belgium
  14. Vlasak, P., Chara, Z., Konfrst, J. and Matousek, V. ?Conveying of Sand in Newtonian and non-Newtonian Carrier?. Proc. 11th Int. Conference on Transport & Sedimentation of Solid Particles?, pp. 193-202, September 2002, Ghent, Belgium
  15. Matousek, V. ?Pressure Drops and Flow Patterns in Sand-Mixture Pipes?. Journal of Experimental Thermal and Fluid Science, No. 26, pp. 693-702, Elsevier, 2002.
  16. Matousek, V. ?Schematisation of the Slurry Flow in Components of a Dredging Installation?. Onderzoeksrapport voor Stichting Speurwerk Baggertechniek, project 016-SSB-TUD-P1, July 2002. 2002.BT.5663
  17. Van Rhee, ?The Influence of the bed shear stress on the sedimentation of sand?, Proc. 11th Int. Conference on Transport & Sedimentation of Solid Particles?, pp. 223-231, September 2002, Ghent, Belgium
  18. Y. Ma, S.A. Miedema, W.J. Vlasblom ?Theoretical simulation of the measurements process of electrical impedance tomography?, Asian Simulation Conference/5th Int. Conf. On System Simulation and Scientific Computing, Shanghai, 3-6 nov. 2002, blz. 261-265, ISBN 7-5062-5571-5/TP.75
  19. M. den Burger, A.M. Talmon ?Particle trajectories along a cutter head blade, using the results of a CFD model for the flow?, congres: Dredging 02, Orlando, Florida, USA, May 5-8 2002
  20. Van Rhee, d'Angremond etc.: The influence of entrained air...
  21. C. van Rhee, "Numerical Modelling of the flow and settling in a Trailing Suction Hopper Dredge", Hydrotransport Conference 15, Banff, Canada, 3-5 juni 2002. blz 547-561
  22. Nguyen Quan Thanh, Miedema, S.A., ?Automotive electricity and electronics?, december 2002, 351 blz?s
  23. A.W. Gerstel, ?Homogenization Efficiency of Mammoth Silos? Bulk Solids Handling, ISSN 0173 9980, p. 362-368, Volume 22, no 5, December 2002
Publications 2001
  1. Burger, M. den, "Influence of Ladder Inclination Angle and Particle Size on Cutterhead Production". Proc. WODCON VI, April 2001, Kuala Lumpur, Malaysia 2001.
  2. Burger, M. den & Talmon, A.M., "Mechanical Transportation Of Particles Induced By Cutterblade Geometry". CEDA Dredging Day 2001, November 2001, Amsterdam, The Netherlands.
  3. He, J., Vlasblom, W.J., Zwartbol, A., "Experimental Investigations on Three-Dimensional Cutting of Densely Packed and Saturated Sand". Proc. WODCON VI, April 2001, Kuala Lumpur, Malaysia 2001.
  4. Heggeler, O.W.J. ten, Vercruysse, P.M., Miedema, S.A., "On the Motions of Suction Pipe Constructions a Dynamic Analysis". Proc. WODCON VI, April 2001, Kuala Lumpur, Malaysia 2001.
  5. Korving, A.C. & Matousek, V., "The Modeling Of Fine-Slurry Flow In A Pipeline: The Effect Of Turbulent Diffusion And Relative Viscosity". CEDA Dredging Day 2001, November 2001, Amsterdam, The Netherlands.
  6. L. de Jonge, W.J. Vlasblom, W. van de Bos and A.H. Boezeman, "Modelling And Testing Of Sub-Sea Diamond Mining Machine". CEDA Dredging Day 2001, November 2001, Amsterdam, The Netherlands.
  7. Matousek, V., "Distribution and Friction of Particles in Pipeline Flow of Sand-Water Mixtures". Handbook of Conveying and Handling of Particulate Solids, Elsevier Press., in press 2001.
  8. Matousek, V., "On the Amplification of Density Waves in Long Pipelines Connected with a Dredge". Proc. WODCON VI, April 2001, Kuala Lumpur, Malaysia 2001.
  9. Matousek, V., "Flow Friction of Mixture Composed of Fine Sand and Coarse Sand". Proc. the 4th Int. Conf. on Multiphase Flow, New Orleans, 2001.
  10. Miedema, S.A., "Automation of a Cutter Dredge, Applied to the Dynamic Behaviour of a Pump/Pipeline System. Proc. WODCON VI, April 2001, Kuala Lumpur, Malaysia 2001.
  11. Miedema, S.A., "An Analytical Method of Pore Pressure Calculations when Cutting Water Saturated Sand". Texas A&M 33nd Annual Dredging Seminar, June 2001, Houston, USA 2001.
  12. Miedema, S.A., "A Numerical Method of Calculating the Dynamic Behaviour of Hydraulic Transport". 21st Annual Meeting & Technical Conference of the Western Dredging Association, June 2001, Houston, USA 2001.
  13. Miedema, S.A., & Riet, E.J. van, & Matousek, V., "Theoretical Description And Numerical Sensitivity Analysis On Wilson Model For Hydraulic Transport Of Solids In Pipelines". To be published in: WEDA Journal of Dredging Engineering in 2002.
  14. Rhee, C. van, "Numerical Simulation of the Sedimentation Process in a T.S.H. Dredge". Proc. WODCON VI, April 2001, Kuala Lumpur, Malaysia 2001.
  15. Rhee, C. van, "Modelling the Sedimentation Process in a Trailing Suction Hopper Dredge". 4th International Conference on Multiphase Flow, New Orleans, USA, 2001.
  16. Verdoodt, L.L., Burger, M. den, "Measurements of the Flow Generated by a Cutterhead". Proc. WODCON VI, April 2001, Kuala Lumpur, Malaysia 2001.
  17. Zhao Yi, & Miedema, S.A., "Finite Element Calculations To Determine The Pore Pressures When Cutting Water Saturated Sand At Large Cutting Angles". CEDA Dredging Day 2001, November 2001, Amsterdam, The Netherlands.
  18. Schott, D.L. and Wijk, L.A. van, "Large Scale Homogenization in Mammoth Silos: a Comparison with Existing Small Scale and Large Scale Blending Methods", In Proc. Powder & Bulk Solids Conference, Rosemont (Chicago), Illinois USA, Reed Exhibition Companies, May 7-11, 2001, pp 425 - 436
  19. Schott, D.L. et al., "Homogenization theory of Mammoth Silos", In Proc. 7th International Conference on Bulk Materials Storage, Handling and Transportation, University of Newcastle NSW, Australia, October 3-5, 2001, pp. 199-208
  20. Gerstel, A.W. and Schott, D.L., Systematic Homogenization in Mammoth Silos, In Proc. 7th International Conference on Bulk Materials Storage, Handling and Transportation, University of Newcastle NSW, Australia, October 3-5, 2001, pp. 189-198
Publications 2000
  1. Boezeman, A.H., Angevaren, C.A., Bos, W. van den, Vlasblom, W.J., "Structural and Dynamic Analysis of Sub-Sea Diamond Miner MKII". Terra et Aqua No. 81, December 2000.
  2. Hofstra, C. & Hemmen, A. van & Miedema, S.A. & Hulsteyn, J. van, "Describing the position of backhoe dredges". Texas A&M 32nd Annual Dredging Seminar. Warwick, Rhode Island, June 25-28, 2000.
  3. Matousek, V. (2000). "Experimental investigation of slurry flow mechanism in a pipeline". Journal of Dredging Engineering, WEDA, Vol. 2, No. 3, pp. 18-39..
  4. Matousek, V. (2000). "Concentration distribution in pipeline flow of sand-water mixtures". Journal of Hydrology and Hydromechanics, Vol. 48, No. 2, pp. 194-210 (ISSN 0042/790X).
  5. Matousek, V. (2000). "Inclined flows of coarse mixtures". Proc. 10th Int. Conf. Transport & Sedimentation of Solid Particles, Wroclaw, Poland, Vol. 1, pp. 127-141 (ISBN 83-87866-12-1).
  6. Matousek, V. & Ni, F. (2000). "On the economy of pipeline transportation of high concentrated and broad graded sand-water slurries: Results of laboratory tests". Proc. XXth WEDA Technical Conf. and XXXIIst Texas A&M Dredging Seminar, Providence/Warwick, Rhode Island, pp. 73-86.
  7. Matousek, V. (2000). "Solids distribution in pipeline flows of highly concentrated sand-water mixtures". Proc. The 3rd Israeli Conference for Conveying and Handling of Particulate Solids and the 10th International Freight Pipeline Society Symposium, The Dead Sea, Israel, pp. 12.20-12.25.
  8. Miedema, S.A., "The modelling of the swing winches of a cutter dredge in relation with simulators". Texas A&M 32nd Annual Dredging Seminar. Warwick, Rhode Island, June 25-28, 2000.
  9. Miedema, S.A., Vlasblom, W.J., Bian, X., "Course Development on Topic 5: Dredging Technology, Power Drives, Instrumentation and Automation". Delft University of Technology and CICAT, Delft July 2000.
  10. Randall, R. & Jong, P. de & Miedema, S.A., "Experience with cutter suction dredge simulator training". Texas A&M 32nd Annual Dredging Seminar. Warwick, Rhode Island, June 25-28, 2000
  11. Rhee, C. van, "Entrainment of Sediment (or Reduction of Sedimentation) at High Concentration". 10th International Conference on Transport & Sedimentation of Solid Particles, 4-7 September, Wroklaw, Poland.
  12. Vlasblom, W., "The effect of high concentrated sand-water mixtures on the characteristics of a slurry pump". Texas A&M 32nd Annual Dredging Seminar. Warwick, Rhode Island, June 25-28, 2000.
  13. Vlasblom, W.J., Miedema, S.A., Ni, F., "Course Development on Topic 5: Dredging Technology, Dredging Equipment and Dredging Processes". Delft University of Technology and CICAT, Delft July 2000.
Publications 1999
  1. Vlasblom, W.J., "Production Control and Quality Control Aspects During Executions of the Reclamation Works at Chek Lap Kok". Terra et Aqua, March 1999, issue 74.
  2. Van Dijk, J.A. & Miedema, S.A. & Bout, G., "Curriculum Development Mechanical Engineering". MHO 5/CTU/DUT/Civil Engineering. Cantho University Vietnam, CICAT Delft, April 1999.
  3. Matousek, V., "Laboratory Investigation of Flow Mechanism in a Slurry Pipeline". Texas A&M 31st Annual Dredging Seminar. Louisville Kentucky, May 16-18, 1999.
  4. Vlasblom, W.J., "Production and Quality Control During Dredging Works at the New Hong Kong Airport". Texas A&M 31st Annual Dredging Seminar. Louisville Kentucky, May 16-18, 1999.
  5. Miedema, S.A., "Considerations in building and using dredge simulators". Texas A&M 31st Annual Dredging Seminar. Louisville Kentucky, May 16-18, 1999.
  6. Miedema, S.A., "Considerations on limits of dredging processes".19th Annual Meeting & Technical Conference of the Western Dredging Association. Louisville Kentucky, May 16-18, 1999.
  7. Ni, F. & Vlasblom, W.J. & Zwartbol, A., "Effects of Various Sand Sizes and Distributions on Characteristics of a Slurry Pump". CEDA Dredging Days, Amsterdam, November 18/19, 1999.
  8. Dekker, M.A. & Vlasblom, W.J. & Kruyt, N.P., "Measuring Water Velocities Round a Cutterhead". CEDA Dredging Days, Amsterdam, November 18/19, 1999.
  9. Burger, M. den, & Vlasblom, W.J. & Talmon, A.M. "Influence of Operational Parameters on Dredge Cutterhead Spillage". CEDA Dredging Days, Amsterdam, November 18/19, 1999.
  10. Matousek, V. (1999). "Description of pipeline flow of settling mixture based on internal structure of mixture flow". Proc. Problems in Fluid Mechanics and Hydrology, Prague, Czech Republic, in press.
  11. Ni, F. & Matousek, V. (1999). "Flow of aqueous mixture of sand composed of fractions of different particle size". Proc. Hydrotransport 14, BHRG, Cranfield, UK, in press.
  12. Ni, F., Vlasblom, J.W. & Zwartbol, A. (1999). "Effect of high solids concentration on characteristics of a slurry pump". Proc. Hydrotransport 14, BHRG, Cranfield, UK, pp. 141-9.
  13. Steinbusch, P.J., Vlasblom, J.W. & den Burger, M. (1999). "Numerical simulation of the flow generated by cutter heads". Proc. Hydrotransport 14, BHRG, Cranfield, UK, pp. 435-43.
  14. Ooijens, S.C., "Adding Dynamics to the Camp Model for the Calculation of Overflow Losses". Terra et Aqua, September 1999, issue 76.
  15. Miedema, S.A., "Curriculum Development Mechanical Engineering". MHO 5-6/CTU/DUT. Cantho University Vietnam, CICAT Delft, Mission October 1999.
  16. Miedema, S.A. & Klein Woud, H.K.W. & van Bemmel, N.J. & Nijveld, D., "Self Assesment Educational Programme Mechanical Engineering". Faculty O.C.P., Delft University of Technology, 1999.