Y. (Yu) Chen


Master of Architecture
2014-2015. University of Nottingham, UK.

Bachelor of Architecture
2009-2014. Xi’an University of Architecture and Technology, China.


Developing a limestone calcined clay-based 3D printable and sustainable cementitious material.

  • Mix designs and fresh properties
  • Hardened properties
  • Voids and porosity for the printed concrete
  • Application of the material design in architecture area
  • Chen, Y., Veer, F., & Copuroglu, O. (2017). A critical review of 3D concrete printing as a low CO2 concrete approach. Heron, 62(3).
  • Chen, Y., Veer, F., Copuroglu, O., & Schlangen, E. (2018, September). Feasibility of Using Low CO2 Concrete Alternatives in Extrusion-Based 3D Concrete Printing. In RILEM International Conference on Concrete and Digital Fabrication (pp. 269-276). Springer, Cham.
  • Chen, Y., Chaves Figueiredo, S., Yalçinkaya, Ç., Çopuroğlu, O., Veer, F., & Schlangen, E. (2019). The effect of viscosity-modifying admixture on the extrudability of limestone and calcined clay-based cementitious material for extrusion-based 3d concrete printing. Materials, 12(9), 1374.
  • Chen, Y., Li, Z., Chaves Figueiredo, S., Çopuroğlu, O., Veer, F., & Schlangen, E. (2019). Limestone and Calcined Clay-Based Sustainable Cementitious Materials for 3D Concrete Printing: A Fundamental Study of Extrudability and Early-Age Strength Development. Applied Sciences, 9(9), 1809.

Yu Chen

PhD candidate


Materials, Mechanics, Management & Design (3Md)

Materials and Environment

Chair / Research:
Experimental Mechanics

Jacqueline van Unen-Bergenhenegouwen

Persoon niet gevonden

De informatie is helaas niet beschikbaar.