Researchers from TU Delft combine spintronics and nanophotonics in 2D material

News - 25 January 2018 - Communication

Spintronics in materials of just a few atoms thick is an emerging field in which the ‘spin’ of electrons is used to process data, rather than the charge. Unfortunately, the spin only lasts for a very short time, making it (as yet) difficult to exploit in electronics. Researchers from the Kavli Institute of Nanoscience at TU Delft, working with the Netherlands Organisation for Scientific Research’s AMOLF institute, have now found a way to convert the spin information into a predictable light signal at room temperature. The discovery brings the worlds of spintronics and nanophotonics closer together and might lead to the development of an energy-efficient way of processing data, in data centres, for example. The researchers have given an account of their results in Science.

The research revolved around a nano-construction consisting of two components: an extremely thin silver thread, and a 2D material called tungsten disulfide. The researchers attached the silver thread to a slice of tungsten disulfide measuring just four atoms in thickness. Using circularly polarised light, they created what are known as ‘excitons’ with a specific rotational direction. The direction of that spin could be intitialized using the rotational direction of the laser light.

Original state
Excitons are actually electrons that have bounced out of their orbit. With this technique, the laser beam ensures that the electrons are launched into a wider orbit around a positively charged ‘hole’, in much the same way as a hydrogen atom. The excitons thus created want to return to their original state. On their return to the smaller orbit, they emit an energy package in the form of light. This light contains the spin information, but it emitted in all directions.

To enable the spin information to be put to use, the Delft researchers returned to an earlier discovery. They had shown that when light moves along a nanowire, it is accompanied by a rotating electromagnetic field very close to the wire: it spins clockwise on one side of the wire, and anti-clockwise on the other side. When the light moves in the opposite direction, the spin directions change too. So the local rotational direction of the electromagnetic field is locked one-to-one to the direction with which the light travels along the wire. ‘We use this phenomenon as a type of lock combination,’ explains Kuipers. ‘An exciton with a particular rotational direction can only emit light along the thread if the two rotational directions correspond.’

Opto-electronic switches
And so a direct link is created between the spin information and the propagation direction of the light along the nanowire. It works almost perfectly: the spin information is ‘launched’ in the right direction along the thread in 90% of cases. In this way, fragile spin information can be carefully converted into a light signal and transported over far greater distances. Thanks to this technique, which works at room temperature, you can easily make new optoelectronic circuitry. Kuipers: ‘You don't need a stream of electrons, and no heat is released. This makes it a very low-energy way of transferring information.’

The discovery clears the way for combining the worlds of spintronics and nanophotonics. Kuipers: ‘This combination may well result in green information processing strategies at the nanoscale.’

****

More information:

‘Nanoscale chiral valley-photon interface through optical spin-orbit coupling, Su-Hyun Gong, Filippo Alpeggiani, Beniamino Sciacca, Erik C. Garnett, L. Kuipers
DOI:10.1126/science.aan8010

Prof. Kobus Kuipers
Kavli Institute of Nanoscience, TU Delft
L.Kuipers@tudelft.nl
+31 (0)15 27 85116