Re3 Glass

A new generation of Recycable, Reducible and Reusable cast glass components for structural and architectural applications.

Photo by Faidra Oikonomopoulou


It is only in the last decades that the structural potential of glass has started to unveil. Combining transparency with a high compressive strength, glass enables us to make diaphanous load-bearing compressive members, from beams and columns to free-standing facades and entire glass structures. Although glass’ fabrication boundaries have been continuously stretching, so far, glass structures are still confined to the shapes and dimensions that can be realized by the virtually flat elements fabricated by the float industry. Moreover, despite the fact that glass is fully recyclable, the majority of glass objects are neither reused nor recycled, mainly due to contamination from coatings and adhesives.

Cast glass can escape the design limitations generated from the 2-dimensional nature of float glass. By pouring molten glass into moulds, solid 3-dimensional glass components can be obtained of virtually any shape and cross-section.

Photo by Faidra Oikonomopoulou

Owing to their large cross-sectional area and monolithic nature, such components can form repetitive units for the construction of 3-dimensional, free-form glass structures that do not buckle due to slender proportions, taking full advantage of glass’s high compressive strength and sparing the necessity of an additional supporting structure. The Crystal Houses façade in Amsterdam, designed by MVRDV and developed by the TU Delft Glass & Transparency group, forms the current state-of-the-art in the field of architectural cast glass. The cast block façade, bonded by a rigid, colourless adhesive of virtually zero thickness, manifests the potential of cast glass in architecture but also points out the engineering challenges resulting from a permanent construction of extreme accuracy and intensive and meticulous labour.

Photo by Faidra Oikonomopoulou


Grasping this potential, the “Re3 Glass” project introduces a novel, reversible system comprising dry-assembled, interlocking cast glass components in respect to the waste hierarchy of Reduce, Reuse and Recycle. Re3 Glass can tackle the challenges generated by the aforementioned system and enable the circular use of the glass components, through the following threefold Re3 approach:

Step 1: REcycle by employing waste glass

Although in theory glass can be endlessly remelted without loss in quality, in practice only a small percentage gets recycled, mainly by the float and packaging industry. Most of the discarded glass fails to pass the high quality standards of the prevailing glass industry -due to coatings, adhesives,  other contaminants or incompatibility of the recipe-  and ends up in the landfill. Employing discarded glass in cast components can be a way to reintroduce this waste to the supply chain. Cast glass units–due to their increased cross section– can tolerate a higher degree of impurities and thus can be produced by using waste glass as a raw source, without necessarily compromising their mechanical or aesthetical properties.

Photo by Faidra Oikonomopoulou

Step 2: REduce by implementing smart geometry

Smart geometry is implemented in the form of cavities and notches, to achieve lightweight yet strong components that reduce not only the required raw material but also the overall embodied energy.

Photo by Faidra Oikonomopoulou
Photo by Faidra Oikonomopoulou

Step 3: REuse by designing interlocking components

Through an interlocking geometry, the proposed system can attain the desired stiffness and stability with the aid of minimal metal framing. Furthermore, the new system circumvents the use of adhesives by using a dry, colourless interlayer as an intermediate between the glass units. Besides preventing stress concentrations due to glass to glass contact, the dry interlayer can also accommodate the inevitable dimensional tolerances in the cast units’ size.  Most important, a dry interlayer allows for a reversible glass system and for the circular use of the components.

Photo by Faidra Oikonomopoulou

To validate the concept, different component geometries have been developed and kilncast by the <link bk over-faculteit afdelingen architectural-engineering-and-technology organisatie leerstoelen structural-design glass-transparency-research-group>Glass & Transparency Group of TU Delft and assessed in terms of mechanical interlocking capacity, mass distribution and ease of fabrication. The structural performance of the interlocking components is validated by both numerical models and physical testing of the kilncast prototypes.

Photo by Faidra Oikonomopoulou

Different materials, (e.g. PVB, PU) and production methods for the dry, transparent interlayer have also been experimentally assessed. Series of experiments on different glass types, from beer bottles and Pyrex® trays to mobile phone and computer screens, open new possibilities for the recycling of everyday glass waste into structural glass components.

Photo by Faidra Oikonomopoulou
Photo by Faidra Oikonomopoulou

Outcome of the “Re3 Glass” project is the new generation of REcyclable, REducible and REusable cast glass components, proposing an innovative and sustainable way of building with diaphanous structural components. For its innovative use of waste glass and circular approach, Re3 Glass has been nominated for the New Material Award 2018.

Design, Research & Development team

Contact

Telesilla Bristogianni

Faidra Oikonomopoulou