Y. (Yaolu) Liu, MSc
Profile
I obtained my master from Tsinghua University, China, from 2011-2014 and bachelor from Dalian University of Technology, China, from 2007-2011.
Research
My current research is focused on numerical modeling of delamination in composite laminate, specifically aiming at simulating strain rate effect of composites with CZM models, thick-level-set method and multiscale modeling techniques. During my master, I had experiences in numerical modeling of the breakage and failure process of quasi-brittle materials with meshless methods.
- Liu, Y., van der Meer, F. P., & Sluys, L. J. (2018). Cohesive zone and interfacial thick level set modeling of the dynamic double cantilever beam test of composite laminate. Theoretical and Applied Fracture Mechanics, 96, 617–630. doi:10.1016/j.tafmec.2018.07.004
- Zhou, Y., Liu, Y., Tang, X., Cao, S., & Chi, C. (2014). Numerical investigation into the fragmentation efficiency of one coal prism in a roller pulveriser: homogeneous approach. Minerals Engineering, 63, 25–34. doi:10.1016/j.mineng.2013.10.022
Yaolu Liu
PhD candidate
- y.liu-7@tudelft.nl
-
Faculty of Civil Engineering and Geosciences
Building 23Room: 6.43
Department:
Materials, Mechanics, Management & Design (3Md)
Section:
Applied Mechanics
Secretary:
Iris Nederhof-van Woggelum
Person not found
The information is currently unavailable.