Innovation is crucial to fulfil the potential of industrial biotechnology for sustainable production of fuels, chemicals, materials, food and feed. Similarly, scientific and technological advances in environmental biotechnology are needed to enable novel approaches to water purification, and ‘waste-to-product’ processes thus contributing to a circular economy. Increased fundamental knowledge encompassing enzymes, microorganisms and processes are essential for progress in this field. The Department of Biotechnology covers this research area and, based on new insights, selects, designs and tests new biobased catalysts, micro-organisms, and processes.
The department encompasses five research sections:
23 December 2021
Super-fast technique measures heme enzyme reaction as it happensResearchers from TU Delft found an unexpected new enzyme intermediate at work in enzymes that contain heme, a cofactor that’s vital for many processes in our body such as the breaking down of toxins in the liver. The researchers used new, rapid techniques, which are less invasive than existing methods. The results, published in ACS Catalysis, increase our understanding of heme proteins and enzymes and how they can be engineered.
25 November 2021
BEI Best MSc Graduate 2021: Alicia Rodríguez Molina!BEI Best MSc Graduate Awards 2021 Since 2020, Delft Bioengineering Institute (BEI) organizes a cross-campus competition for MSc students who performed remarkably well at their graduation projects in bioengineering. This year, sixteen very impressive theses were submitted. After a strenuous review and discussion, the jury finally agreed that Alicia Rodríguez Molina (MSc Life Science & Technology), Akash Singh (MSc Computer Science) and Jette Bloemberg (MSc Mechanical Engineering) have delivered the most innovative, interdisciplinary bioengineering projects of 2021. On top of eternal fame, they will receive personal cash prizes of €1000, €500 and €250. 1. Alicia Rodríguez Molina (MSc Life Science & Technology) Thesis: "TPR-CHAT is a caspase-like protease that forms a complex with the CRISPR-Cas type III-E endoribonuclease effector gRAMP” Daily supervisor: Sam van Beljouw (Applied Sciences, Bionanoscience) Thesis Committee: Stan Brouns (AS/BN), Peter-Leon Hagedoorn (AS/Biotechnology), Chirlmin Joo (AS/BN) “Alicia has made large contributions to our research discovering a new CRISPR-Cas system with potentially profound implications and new applications. She has been responsible for the major discovery that links a protease (protein cleaving enzyme) to CRISPR-Cas for the first time. The protein complex she identified was named Craspase and can likely trigger cell suicide in bacteria to protect bacteria from virus infection. We anticipate that Craspase can be converted to a tool for applications in molecular diagnostics, targeted knockdown of gene expression and biomolecule activation or deactivation in cells. A patent was also filled to protect some of these ideas. Importantly, her findings were included in a paper published in Science August 26 (attached) on which she was third author.” 2. Akash Singh (MSc Computer Science) Thesis: “Unsupervised Manifold Alignment with TopoGAN” Thesis Committee: Marcel Reinders (EWI/Pattern Recognition and Bioinformatics), Christoph Lofi (EWI/Web Information Systems), Ahmed Mahfouz (EWI/PRB and LUMC/Radiology), Tamim Abdelaal (LUMC/Radiology) “In his thesis, Akash developed TopoGAN, a deep learning method to solve the challenging task of integrating single cell datasets with no matching samples (i.e. cells) or features. Akash’s thesis proposes multiple innovative ideas to address this challenge. First, Akash showed that Topological Autoencoders can capture the heterogeneity of single cell data better than current approaches such as (variational autoencoders, tSNE and UMAP). This on its own is a significant contribution to the field. Second, Akash proposed an approach to tackle the instability of GAN methods in the task of manifold alignment, which can be generally applied in other fields of machine learning. Third, in evaluating the performance of his method, Akash showed that current strategies have severe shortcomings and should as such be revised to faithfully reflect the performance of different methods.” 3. Jette Bloemberg (MSc Mechanical Engineering) Thesis: “MRI-Ready Actuation System for a Self-Propelling Needle” Supervisors: Fabian Trauzettel (3mE/Biomechanical Engineering), Dimitra Dodou (3mE/BmechE), Paul Breedveld (3mE/BmechE) Thesis Committee: Paul Breedveld (3mE/BmechE), Fabian Trauzettel (3mE/BmechE), Dimitra Dodou (3mE/BmechE), Matthijs Langelaar (3mE/Precision and Microsystems Engineering), Jovana Jovanova (3mE/MTT) “Jette did a very interesting research into a new kind of self-propelled steerable needle for prostate interventions under MRI. She developed a perfectly working prototype, bio-inspired on the anatomy of parasitic wasps. (…) Based on a past PhD project in which we developed novel, self-propelling needles based on the ovipositor-anatomy of parasitic wasps, Jette brought this research to an entirely new level. In her project we wanted to evaluate ovipositor-inspired needles on human prostate tissue under MRI. This means that the design should not contain any metallic parts that react on the powerful magnetic MRI-field. To solve this issue, Jette designed an entirely novel manually-driven propulsion mechanism that she printed from plastic on Formlabs and Ulitimaker 3D-printers, thereby gaining a lot of know-how on how to design complex mechanisms with tight tolerances using 3D printers. Driven by her novel propulsion mechanism, Jette designed a very thin (Ø0,81mm) ovipositor needle composed out of six individually moveable NiTi rods. For the experiments in human prostate tissue, Jette set up a very close collaboration with a well-known urology group at the Amsterdam University Medical Center (AUMC), headed by Dr. Daniel Martijn de Bruin. Jette organised many meetings with this group, arranging human prostate tissue, and using an MRI-laboratory scanner at the AUMC for her experiments. As the space within this MRI-scanner was limited, she also developed a special experimental facility in which the tissue could be stored and moved with near zero friction.”
27 October 2021
Making artificial leather while processing wastewaterLeather is a strong product but has been getting bad press lately due to the fact that it is made of animal skins and the production process is a burden on the environment. The TU Delft student team WaterSkins has come up with a very sustainable alternative: artificial leather made during the treatment of wastewater.
28 May 2020
Awards for three researchers of ASIt's raining awards at the Faculty of Applied Sciences. No less than three researchers have been rewarded with various prizes over the past period. They are Ad van Well, Arthur Gorter de Vries and Jasmijn Hassing. Together with colleagues from 3mE, Ad van Well (Radiation Science & Technology) received the Vanadium Award for the best scientific article of 2019 in the fiel of vanadium research . The award is presented by the Institute of Materials, Minerals and Mining (IOM3) in Great Britain. The article stems from the HTM/NWO Nano-steel project, in which Ad van Well and his colleagues, especially PhD candidate Chrysoula Ioannidou, are researching a new type of steel that is both strong and malleable: pure ferrite reinforced with nanoparticles of vanadium carbide. Ex-researcher A rthur Gorter de Vries (Biotechnology) received the Westerdijk Award for the best dissertation of the year in the category Environmental & Applied Microbiology . This award is presented by the Royal Dutch Society for Microbiology (KNVM) and the Dutch Society for Medical Microbiology (NVMM). Gorter de Vries was frequently in the news before his promotion, among other things because he witnessed the emergence of a new gene in the lab and because of his discovery that all pilsner yeasts, the famous microorganisms that brewers produce hundreds of billions of litres of lager and other lager beers with every year, were created some 500 years ago in a one-off encounter between two types of yeast . Jasmijn Hassing, like Gorter de Vries from the group of Jean-Marc Daran (Biotechnology), received the Kiem Award. This prize is also awarded by the KNVM/NVMM, and is intended for excellent papers in which starting young microbiologists are the first authors. In order to qualify, the article must have been published in an internationally renowned journal in the past year. Hassing was awarded the prize for a paper on the production of 2-phenylethanol using yeast. 2-phenylethanol is an organic, aromatic compound that smells like roses and is widely used in the food and cosmetics industries.
14 May 2020
How copper can damage a cellCopper is important for many processes in our body. Among other things, it supports the production of red blood cells, metabolism, and the formation of connective tissue and bones. Copper is also known to play a role in diseases such as cancer, diabetes and Alzheimer's disease. Unfortunately, we do not yet know exactly what that role entails. Researchers from Delft University of Technology and the Polish Academy of Sciences have now discovered a new piece of the puzzle. In order to be able to do its work, copper binds to different types of proteins in the cell. And although the complexes that are formed in this process are not harmful in themselves, temporary 'intermediate forms' appear to arise during the binding, which can lead to damage to the cell. The results of the research have been published in Angewandte Chemie.
30 April 2020