Dr.ir. M. (Matthijs) Langelaar
Dr.ir. M. (Matthijs) Langelaar
Profile
Matthijs Langelaar is Associate Professor at Delft University of Technology, and leader of the Computational Design and Mechanics research group. The focus of his research is to advance computational design techniques in particular for demanding high-tech applications, with a specific emphasis on topology optimization. He and his research team are currently intensively involved in the ongoing research effort to define design approaches for additive manufacturing.
He holds a PhD degree from Delft University of Technology and an MSc degree in Mechanical Engineering from University of Twente. He has also worked at DLR (German Aerospace Center, Robotics Institute), University of Colorado at Boulder in the US, with Prof. Kurt Maute), at the Univeristy of Freiburg in Germany, with Prof. Jan Korvink) and at Seoul National University with Profs. Yoon Young Kim and Gil Ho Yoon, in Korea.
Publications
-
2023
Overheating control in additive manufacturing using a 3D topology optimization method and experimental validation
R. Ranjan / Z. Chen / C. Ayas / M. Langelaar / F. Van Keulen
-
2022
A physics-based topology optimization method for enhancing precision in metal am parts
Rajit Ranjan / Zhuoer Chen / Can Ayas / Matthijs Langelaar / Fred Van Keulen
-
2022
A simple and versatile topology optimization formulation for flexure synthesis
S. Koppen / M. Langelaar / F. van Keulen
-
2022
A stress-based criterion to identify and control intersections in 2D compliance minimization topology optimization
Vibhas Mishra / Can Ayas / Matthijs Langelaar / Fred van Keulen
-
2022
Controlling cooling rates through topology optimization for required microstructure in additive manufacturing process
Vibhas Mishra / Can Ayas / Matthijs Langelaar / Fred van Keulen
-
Courses 2022
Courses 2021
Media
-
2021-06-01
Researchers develop novel topology optimization technology for large-scale 3D printing
Appeared in: 3D Printing Industry
-
2020-12-10
Lichtgewicht ‘vliegend tapijt’ maakt chipmachine van ASML nóg beter
Appeared in: Eindhovens Dagblad
-
2020-11-06
Topologie-optimalisatie en 3d-printing brengen waferstage naar hoger plan
Appeared in: Mechatronica en Machinebouw
-
2020-10-07
Terugblik op succesvolle HI Speedtrack: Topologie Optimalisatie
Appeared in: Holland Instrumentation
-
2020-10-01
Beyond additive manufacturing— Generative design shapes for milling too
Appeared in: Design World
Ancillary activities
-
2023-01-20 - 2025-01-20