Prof.dr.ir. L.J. Sluys

Profile

Professor Bert Sluys received his PhD from Delft University of Technology in 1992. After that he was a Research Fellow of the Netherlands Academy of Arts and Sciences (KNAW) at Delft University of Technology (1992-1997). He was a post-doctoral researcher at Brown University, Providence, USA (1993), at the University of Western Australia, Perth, Australia (1996) and at the University of Glasgow, U.K (1996). He was a Visiting Professor at the Laboratoire de Mecanique et Technologie, ENS de Cachan, France (1997) and at the Institut National des Sciences Appliquees de Lyon (INSA), France (2001). In 1999 he became the head of the Computational Mechanics group at the Faculty of Civil Engineering and Geosciences of Delft University of Technology. Since 2005 he is a Full Professor (chair Computational Mechanics) and since 2018 he is the head of the Department Materials, Mechanics, Management and Design (3MD).

Research Interests

Computational mechanics of materials, modelling of failure processes, multi-scale methods, computational modelling of high-performance materials

Recent Publications

Li, K., Stroeven, P., Stroeven, M. and Sluys, L.J. (2017)
A numerical investigation into the influence of the interfacial transition zone on the permeability of partially saturated cement paste between aggregate surfaces. Cement and Concrete Research, 102, p.99-108.(https://doi.org/10.1016/j.cemconres.2017.09.005)

Pereira, L.F., Weerheijm, J. and Sluys, L.J. (2017)
A new effective rate dependent damage model for dynamic tensile failure of concrete. Engineering Fracture Mechanics, 176, p.281-299. (https://doi.org/10.1016/j.engfracmech.2017.03.048)

Rocha, I.B.C.M., Meer, F.P. van der, Nijssen, R.P.L. and Sluys, L.J. (2017)
A multiscale and multiphysics numerical framework for modelling of hygrothermal ageing in laminated composites. International Journal for Numerical Methods in Engineering, 112(4), p.360-379. (https://doi.org/10.1002/nme.5542)

Voormeeren, L.O., Meer, F.P. van der, Maljaars, J. and Sluys, L.J. (2017)
A new method for fatigue life prediction based on the Thick Level Set approach. Engineering Fracture Mechanics, 182, p.449-466. (https://doi.org/DOI:10.1016/j.engfracmech.2017.05.007)

Alfaiate, J. and Sluys, L.J. (2018)
On the use of non-iterative methods in cohesive fracture. International Journal of Fracture, 210(1/2), p.167-186. (https://doi.org/10.1007/s10704-018-0270-2)

More Publications

Bert Sluys

  • +31 15 2782728
  • L.J.Sluys@tudelft.nl
  • Delft University of Technology

    Faculty of Civil Engineering and Geosciences

    Room: 6.49

     

    Stevinweg 1

    2628 CN Delft

    The Netherlands

     

    Fax: +31 15 278 5767


Additional information

Prof.dr.ir. L.J. Sluijs

subjects
2006 - Structural Mechanics 2
2006 - Computational Methods in Non-linear Solid Mechanics
2007 - Computational Methods in Non-linear Solid Mechanics
2007 - Introduction to the Finite Element Method
2009 - Introduction to the Finite Element Method
2008 - Introduction to the Finite Element Method
2008 - Computational Methods in Non-linear Solid Mechanics
2009 - Computational Methods in Non-linear Solid Mechanics
2010 - Introduction to the Finite Element Method
2010 - Computational Methods in Non-linear Solid Mechanics
2011 - Computational Methods in Non-Linear Solid Mechanic
2011 - Introduction to the Finite Element Method
2011 - Introduction to the Finite Element Method
2014 - Introduction to the Finite Element Method
2014 - Computational Methods in Non-Linear Solid Mechanic
2013 - Computational Methods in Non-Linear Solid Mechanic
2015 - Introduction to the Finite Element Method
2013 - Introduction to the Finite Element Method
2015 - Computational Methods in Non-Linear Solid Mechanic
2012 - Introduction to the Finite Element Method
2012 - Computational Methods in Non-Linear Solid Mechanic
2017 - Introduction to the Finite Element Method
2017 - Computational Methods in Non-Linear Solid Mechanic
2016 - Introduction to the Finite Element Method
2016 - Computational Methods in Non-Linear Solid Mechanic
2018 - Introduction to the Finite Element Method
2018 - Computational Methods in Non-Linear Solid Mechanic
2019 - Introduction to the Finite Element Method
2019 - Computational Methods in Non-Linear Solid Mechanic
ancillary activities
No secondary work -

2018-01-01 - 2020-01-01