Electric Power Systems

Track

The Electric Power Systems track provides the students with technical knowledge about the components and systems necessary for the integration of renewable energy within the power system.

Profile of the Electric Power Systems graduate:

  • Fundamental knowledge of the physical components of power systems and electronics as well as of new designs of HVDC systems and control theory
  • Technical knowledge of the components and systems required for renewable energy integration within the power system
  • Competences in modelling and analysis of composite systems with respect to both their steady state and dynamics
  • Mastery of electrical power systems design and its components with special attention on reliability, protection as well as operation and maintenance in offshore applications.

This track gives the student a combination of standard power system analysis skills and of more specific ones related to the electric power systems used in offshore applications. Within the field of electric power systems the student can further chose to follow different profiles, namely electric power systems for offshore wind farms, off-shore grids or technical and economic integration aspects of intermittent generation.

Courses

The Electric Power Systems student is required to accomplish a minimum of 30 ECTS per semester by taking mandatory as well as elective courses. Students need to get the approval of their complete course list by the track coordinators of both universities awarding the degree. An overview of the courses offered within the Electric Power Systems track is provided below.

Note: the listed electives courses are the only courses that are pre-approved by the track coordinators. Should students want to follow elective courses that are not already included in this list, they should request their track coordinators to review and approve the courses before enrolling for such courses.

30 ECTS courses @DTU

Click here to find information about the courses at DTU.

Mandatory

 

ECTS

46300 Wind Turbine Technology and Aerodynamics 10
46700 Electric Power Engineering, Fundamentals 10
34652 Power Electronics 1 10

 

Additional Electives

 

ECTS

46710

Stability and Control in Electric Power Systems

10

46715 Transients in Power Systems 5
46745 Integration of Wind Power in the Power System 5
.Should you decide to follow additional electives at DTU, please keep in mind that this will result in a high study load. Priority should be given to the mandatory components of your study.

30 ECTS courses, incl. free electives such as internship or Dutch for foreigners (max 15ECTS) @TU Delft

The 2nd semester at the TU Delft is divided in two quarters. Click here to find information about the courses at the TU Delft. It is suggested that EWEM-students follow one of the three profiles given at the electives below in order to prepare themselves for the MSc thesis project.

Mandatory 

ECTS

ET4108 Transient in Power Systems 4

Electives / specialization courses

High Voltage
EE4545 Electrical Power Systems of the Future 4
EE4375 Finite Element Modeling for Electrical Energy Applications 4
ET4111 High-Voltage DC 3
ET4114 Power System Grounding and Protection 3
ET4116 Power Electronics 4
ET8020 High Voltage Testing and Diagnosis 4
Power Electronics and Electrical Machines
EE4515 Advanced Power Electronics 4
EE4375 Finite Element Modeling for Electrical Energy Applications 4
ET4117 Electrical Machines and Drives (via Collegerama) 4
ET4116 Power Electronics 4
ET4121 A.C. Machines 4
ET4145 Power Electronic Components 4
ET4291 Control of Electrical Drives 5
ET4108 Transients in Power Systems 4
Smart AC Grids and DC Grids
EE4536 DC and AC Microgrids 4
EE4545 Electrical Power systems of the Future 4
ET4108 Transients in Power Systems 4
ET4113 Power System Dynamics 4
ET4117 Electrical Machines and Drives (via Collegerama) 4
ET4116 Power Electronics 4
SET3065 Intelligent Electrical Power Grids 4

Free electives (max 15 ECTS)

WM1115TU Elementary Course Dutch for Foreigners 3
ET5015 Internship** 6
**Students can choose do to an internship at industry and obtain ECTS for it. The faculty of Electrical Engineering at TU Delft  offers an internship of 9 to 15 ECTS, depending on the time the students will stay at a company. EWEM students are allowed to use only 6 ECTS of the total amount of credits in their study programme. The remaining ECTS will be extra-curricular, i.e. the student will end up with >120 ECTS (for example, if the student takes  an internship of 12 ECTS, the student will end up with 126 ECTS after completing the EWEM programme).

15 ECTS courses + thesis @NTNU

Click here to find information about the courses at NTNU.

  You will start with your thesis research project  

Electives

TET4585

High voltage technology, specialisation course

7.5

TET4555

Power Electronics and Components, specialisation course

7.5

TET4565

Electricity Markets and Energy System Planning, specialisation course

7.5

TET4575

Power System Operation and Analysis, Specialisation course

7.5

TET4545

Electrical Machines and Electromagnetics, specialisation course

7.5

TET4205 Power System Analysis 2 7.5

45 ECTS thesis (free mobility)****

 

Compulsory TU Delft

ECTS

ET4300 Master Thesis*** 45

Compulsory NTNU

TET4920 Electric Power Engineering, Master Thesis*** 45

***The specialization project TET5500 Electric power Engineering (15 ECTS) is part of the thesis work. 

****The master thesis is supervised by the two diploma awarding universities and it is worth 45 ECTS. 
/* */