Delft Design Stories
From The Start: The Early Design Bird Gets The Remanufacturing WormThe circular economy. Sustainability. Refurbishment. Remanufacturing. Recycling. We hear these buzzwords used all the time when talking about how humanity needs to lessen its impact on the planet. For her PhD research, Nina Boorsma looked into how to get companies to make more sustainable products and found that the process needs to start early.
29 August 2018
An art and a scienceWhat does it mean to be an industrial designer? Michiel Cremers recently graduated from with a Master’s degree at Industrial Design Engineering. He made a short movie about his experiences and development during his graduation process, where he designed a new helmet for jetfighter pilots.
29 May 2018
A beautiful alarm beside your hospital bedIn hospitals, sounds, beeps and other noises constantly tell staff and patients what’s going on; up to 700 alarm signals a day, or once every two minutes. But only about 2% of these signals require actual attention or direct action. This can lead to'‘alarm fatigue'. How do we solve this?
29 May 2018
A Taste of the Food & Eating Design LabHow our society deals with food is of crucial importance. Many societal challenges can be traced back to our relationship with food and eating. “From agricultural production and food waste to growing obesity and diabetes problems. Even mental health can be related to food.” Rick Schifferstein is director of the Food & Eating Design Lab at the Faculty of Industrial Design Engineering. Here, researchers, students and companies aim to improve people’s interaction with their daily food and provide solutions that promote people’s health and wellbeing.
29 May 2018
These shoes are made for falling…And that’s just what they do. No, it’s not a bad cover version of Nancy Sinatra’s sixties hit. It’s the conclusion of researchers at Delft’s faculty of Industrial Design Engineering (IDE) who have been investigating the suitability of shoes for the elderly. When it comes to shoes, it’s never been a case of one size fits all. Yet the researchers argue that it’s not just shoe size that matters, but the shape of footwear – especially in the over 65 age bracket. Well-fitting and correctly-shaped shoes can improve balance, stability, comfort and safety.
30 January 2018
'Blended learning will remain the ideal model for me'Having already won the 2017 award for best lecturer in the Faculty of Industrial Design and Engineering, Associate Professor Giulia Calabretta went on to be elected the 2017 Best Lecturer at Delft University of Technology as a whole by a jury consisting of students and former winners. As a result she is competing for the National ISO Teacher of the Year Award. What makes her teaching so special? And what makes the field of strategic design so valuable?
30 November 2017
‘You first have to understand why people are equal before you can understand why they’re different.’Paul Hekkert conducted research for years on the underlying principles of aesthetics and experience. As a ‘scientific figurehead’, these past two years he has mainly focused on creating the knowledge and innovation agenda for the Creative Industry top sector.
16 November 2017
People are the key to success in the operating theatreProfessor Jack Jakimowicz will be bidding farewell to the IDE faculty in November, where he has been professor of Safety in Healthcare since 2007. His association with TU Delft goes back much further, however. In the 1990s, he already worked with engineers and researchers on improving the instruments and safety of minimally invasive surgery as a surgeon at the Catharina Hospital in Eindhoven.
Delft Design Stories
Read the stories of researchers and students at the Faculty of Industrial Design Engineering, and discover the scientific questions on which they work and the solutions they present.
Changing the world with only four screwsThe planet is heating up. The oceans are filling with plastic. These are problems that will require huge, cooperative efforts to fix. Francesco De Fazio wanted to do his part. He discovered that just moving four screws on a vacuum cleaner could make a big difference. Text: Molly Quell Toasters and malaria Originally from Italy, Francesco came to Delft to study Integrated Product Design. “Everyone at The Polytechnic University of Milan knows about TU Delft,” he says, which is where he earned his bachelor’s degree. He wanted to improve his English and focus on sustainability issues, and he felt he could do both things in the Netherlands. During his second semester Francesco set to work on the design of the Excelscope - a medical device which can detect malaria with the aid of a smartphone. He readily admits that he spent a lot of that period thinking that the challenge was too great: “It was a lot of pressure for someone who had designed toasters.” The project went on to win the Dutch national James Dyson Award in 2018. Being successful under that amount of pressure came in handy when he went on to his internship. Francesco knew that he wanted to work with a large company, where he felt he could have a bigger impact. And he knew he wanted to work with a Dutch company, which cared about sustainability. He landed a project with the largest and the most quintessentially Dutch company possible for an industrial design engineer: Philips. Green pressure from Brussels While Francesco was worried about his workload in Delft, in Brussels the European Commission was worrying about product repairability. In autumn 2019, the European Commission, as part of its push to make Europe greener, implemented regulations that would require companies to make appliances longer lasting, both by extending lifespans but also by making them easier to repair. These so-called Right to Repair regulations will go into effect in 2021. They are accompanied by a scoring system for companies to determine how easy their products are to repair. The idea is that consumer products should be easier to fix. “Together with smarter energy labels, our eco-design measures can save European consumers a lot of money, as well as help the EU reduce its greenhouse gas emissions,” says European Commissioner for Climate Action and Energy, Miguel Arias Cañete. The problem goes beyond climate change. According to the Global E-Waste Monitor, in 2016, the world created 44.7 million metric tons of e-waste, which includes items like computers, smart phones and washing machines. Only about 20% of that is recycled, with the rest going to landfills or being incinerated. As Francesco would discover, repairing something can be difficult to learn. In current product models, repair work is often time consuming and requires special tools. But surveys show that 77% of consumers in the European Union would like to repair rather than replace. Initiatives such Delft’s Repair Cafe reflect public enthusiasm for more of a make do and mend attitude. Ambitious compromises Philips wanted Francesco to look at several products and assess them for their repairability, underneath the new European Commission framework. “I thought ‘This is exciting’ but I wanted to be able to propose a tangible redesign as well,” he says. He also had another request: that he be allowed to score non-Philips products so the company would also have a sense of how they stacked up against the competition. Philips was receptive to the idea but wanted him to focus on the assessment. So, he found a highly ambitious compromise of sorts. He would get the assessment done in three months and then have three months to work on a redesign. “It cost me a lot of nights and weekends,” he admits. In the end, he selected seven vacuum cleaners - four from Philips and three from competitors - for the first part of his project. There were no guidelines for the process of testing repairability, only a scoring system from the European Commission. In the process of his thesis, he documented his procedure. More than a sum of the parts One of the most important takeaways from his research was his Disassembly Map. This allows someone to map the entire assembly and disassembly of the most important components. Francesco is currently working on an academic paper to document this process together with Professor Ruud Balkenende, which will show other companies and designers how they can do the same thing. Some of the vacuums were extremely complicated to take apart, requiring multiple tools and an extensive series of steps. Others, Francesco describes as “beautiful.” One vacuum he looked at only required the removal of three screws to access the main components. The analysis required him to disassemble and reassemble the same vacuum multiple times. He watched a lot of YouTube videos of people online disassembling vacuums to get a feel for how it was done. “There are a lot of Russian-speaking men who do this for some reason,” he says. Francesco figured out what parts were most critical and which were the most likely to break and how many steps it took to access them. Even though Philips only requested the assessment, he wanted his thesis to be about something more. The existing product design approach at Philips only partially considered repairability as part of the process. Francesco thought that if he could demonstrate the impact of a simple solution, he could convince them to put repairability as a central consideration in the design process. “Every change came with a problem,” he says. He would come up with what he thought was a simple solution, only to be told by someone else in the manufacturing chain that making that adjustment would unleash tremendous issues. As Francesco found out, vacuums must do more than being effective at removing dirt from your floor. They must, like most consumer appliances, meet safety standards. They must be able to be manoeuvred in certain ways. They can’t weigh too much. And, of course, production costs must be kept low. Solving the puzzle Using his Disassembly Map, he eventually figured out several solutions. One, however, was remarkable in its simplicity. By merely adjusting the position of four screws in the casing of one vacuum model, the entire external case of the Philip’s vacuum could be removed in a single step. In the current design, it took seven steps. Philips wasn’t the only one who was impressed with this outcome. His committee awarded him a 10 cum laude on his thesis. “Francesco's work is outstanding because it combines a thorough research approach with real-world impact. Not only did he make an extensive analysis of the repairability of 7 vacuum cleaners, leading to a new design tool; he also convinced Philips of the need to take repairabiltiy into account in their vacuum cleaners.” - Professor Conny Bakker The easier it is to get to the main components; the faster and easier products can be serviced. Francesco prefers to use the term “serviceability” rather than “repairability,” since the goal is for companies, or certified repair persons, to fix them, not the consumers. Regardless of who does the repair work, the easier the process, the less likely someone is to throw away the old appliance and buy a new one. And, if someone does want to upgrade, the easier it is to disassemble, the easier it is to recycle. That means that fewer vacuum cleaners will end up in landfills. After taking all those vacuums apart over and over, repairability is now something that de Fazio considers when buying new products. “But it’s really difficult for the consumer to know, how easy or hard it is to repair something. Unless you can find someone on YouTube who has already done it.” He would love to see mandatory labeling on products to show the level of difficulty in disassembly. Perhaps that’s a problem Francesco can work on his new role. Philips was so happy with de Fazio that they created a new position for him, as a Circular Product Designer, which he started in January 2020. Back to Home Health & Care Climate Action Urbanisation & Mobility Energy Transition Digital Society Francesco De Fazio linkedin This is a story of Industrial Design Engineering Francesco De Fazio This is a story of Industrial Design Engineering Conny Bakker +31 (0)15 27 89822 C.A.Bakker@tudelft.nl Publications Room B-3-330 linkedin Bas Flipsen +31 (0)15 27 89398 firstname.lastname@example.org Publications Room B-3-060 Present on: Mon-Tue-Thu-Fri "Get fired-up instead of burned-up." linkedin Ruud Balkenende +31 15 27 81658 email@example.com Room B-3-310 linkedin
Positive Artificial Intelligence vibesWillem van der Maden recently started his PhD position at Industrial Design Engineering (TU Delft), focusing on ‘Positive AI’. We caught up with him briefly to ask him about his goals at IDE and what we might expect to see come out of several AI projects of the faculty.
The Road to SchistoscopeFor half a year, a team of six dedicated students worked endlessly on solving the problems around diagnosing Schistosomiasis in Nigeria. The tipping point for their project; seeing not only the eggs, but also the spine of the disease in the pictures made by their product. But before reaching this milestone, the team had to overcome many obstacles through weeks of hard work, motivation and creative problem solving. Tina Ekhtiar and Talitha Brenninkmeyer share the ins and outs of the process.
"Designed for our Future"When I was cleaning out my archives from my student days at Industrial Design Engineering (IDE), I happened upon an interactive demo that bore an eerie resemblance to current day taxi-summoning services. Anyone who has been involved in design education, either as a teacher or a student, has probably experienced the same feeling of déjà vu.
A redesigned court: impartially on your sideDutch citizens come into contact with the courts system on average once in their life. For many people - even those accused of minor offences such as being behind on a phone bill – the experience can be overwhelming. So when MSc graduate student Rens de Graaf got the opportunity to improve the service level of the provincial Noord-Holland Court, he grasped the opportunity with both hands.
The power of conscious decision making“I believe this has the potential for change in our daily lives.” When Marina Bos-de Vos, researcher at the Faculty of Industrial Design Engineering at Delft University of Technology, talks about the results of her research, her eyes light up. “Creativity can have a tremendous impact on society. But creative professionals often lose themselves along the way. If they can start to make conscious decisions about their business, their position will only get stronger. And then all those creative solutions, user-friendly designs and sustainable buildings will have an even bigger positive impact.”
Sustainability is a verbBefore we buy them, our products go through several phases where value is added to them. From cars and washing machines, to laptops and smartphones. Every product starts as a collection of raw materials. These have to be extracted first, after which a series of complex refining, manufacturing and transport processes start. Resources become materials, materials become parts, parts become products.
Professors Conny Bakker and Ruth Mugge talk about sustainability in design.